Rubber Spacers / Bumper

AsLan7 · Post by **AsLan7** » Fri Sep 08, 2017 2:50 pm

Driller wrote: ↑Fri Sep 08, 2017 2:31 pm Ha!!! Didn't think it was worth the trouble.

so it didn't happen.

Big Block Power · Post by **Big Block Power** » Fri Sep 08, 2017 8:31 pm

So how close where they to touching? None of mine touched.

Driller · Post by **Driller** » Fri Sep 08, 2017 11:17 pm

They were all touching except two, one on the starboard side. That side is of course the walk trough which needed it most. The other one was under the wet storage which was about a 1/4" low.

AsLan7 · Post by **AsLan7** » Sat Sep 09, 2017 3:52 am

If you could not have found them, driller, that versi-mold product I used in my anchor locker would also have worked well. The rubber bumper I made turned out well.

Driller · Post by **Driller** » Fri Sep 15, 2017 4:27 pm

These shots are by special request for A7. Very exciting shots.

Big Block Power · Post by **Big Block Power** » Fri Sep 15, 2017 5:38 pm

Driller wrote: ↑Fri Sep 15, 2017 4:27 pm These shots are by special request for A7. Very exciting shots.

Can you please one more picture? I think I'm missing something?

Ytmsn · Post by **Ytmsn** » Sat Sep 16, 2017 3:48 am

Yeah.. we wanted a picture of you crammed down in that hold!

AsLan7 · Post by **AsLan7** » Sat Sep 16, 2017 8:13 pm

Man

Nice job driller.

They look great. Very clean and professional.

Except only one side has the screw heads perfectly aligned.

Southernboatman · Post by **Southernboatman** » Sun Sep 17, 2017 8:06 am

Yep need some too.

Driller · Post by **Driller** » Sun Sep 17, 2017 10:26 am

Southernboatman wrote: ↑Sun Sep 17, 2017 8:06 am Yep need some too.

You can probably find them somewhere else, but Lodder's shipped them right down here to Texas.

I order twice as many as I needed. These are not going to last long, a bad design I think.

Southernboatman · Post by **Southernboatman** » Sun Sep 17, 2017 10:52 am

Yeah I have a pretty good supply stock around here but will get online if needed. "Luck" of being in an area with lots of water and boats. That part seems to be a standard go to for a lot of manufacturers.

Bobo87 · Post by **Bobo87** » Sat Apr 28, 2018 9:22 pm

When you ordered these from Lodder Marine do you have a part number or name? How much were they? I need them too. Was about to ask but found this old thread.

Big Block Power · Post by **Big Block Power** » Sat Apr 28, 2018 9:32 pm

Nauti got me some from lodders. I think they were like $7?
I put three on the 222.

cmattj · Post by **cmattj** » Sat Apr 28, 2018 9:39 pm

Geeze .. I could not find a threaded bolt to replace mine.. every thing in stainless had a shank so I could not adjust it down.

Stainless carriage bolt + grinder walah instant bolt head.. not pretty but it worked

Big Block Power · Post by **Big Block Power** » Sat Apr 28, 2018 9:47 pm

cmattj wrote: ↑Sat Apr 28, 2018 9:39 pm Geeze .. I could not find a threaded bolt to replace mine.. every thing in stainless had a shank so I could not adjust it down.

Stainless carriage bolt + grinder walah instant bolt head.. not pretty but it worked

Yours was missing the bolt? One of mine won't adjust but it's close enough not to worry about it.

Cobalt Boats Forum

Rubber Spacers / Bumper

Re: Rubber Spacers / Bumper

Re: Rubber Spacers / Bumper

Re: Rubber Spacers / Bumper

Re: Rubber Spacers / Bumper

Re: Rubber Spacers / Bumper

Re: Rubber Spacers / Bumper

Re: Rubber Spacers / Bumper

Re: Rubber Spacers / Bumper

Re: Rubber Spacers / Bumper

Re: Rubber Spacers / Bumper

Re: Rubber Spacers / Bumper

Re: Rubber Spacers / Bumper

Re: Rubber Spacers / Bumper

Re: Rubber Spacers / Bumper

Re: Rubber Spacers / Bumper

Who is online