Can i run the engine while supplying it with water via the blue hose connector on the front starboard side of the engine? Normally i’d say no issue, but the service manual states that the GXi-A cant be run this way as water is not supplied to the raw water pump. The manual says nothing of the GXi-E.
So is it a flush only fitting, or a run the engine on the hose fitting?
Thanks
8.1GXi-e flush adapter
8.1GXi-e flush adapter
You do not have the required permissions to view the files attached to this post.
2005 272 w/ 8.1 VP GXi
Re: 8.1GXi-e flush adapter
I found the answer elsewhere online. I can run it.
2005 272 w/ 8.1 VP GXi
- Big Block Power
- Fleet Admiral
- Posts: 17904
- Joined: Sat May 07, 2016 8:05 pm
- Location: Neenah,Wi
- Contact:
Re: 8.1GXi-e flush adapter
I have the B and have always ran it on that. Good info though.
03Cobalt220 8.1gxi DP
"Kids in Tow2"
"Pot The Jus" Originator :-)
Neenah Wi
#ItsBu'sfault
#FARCON Marine CC Core!
"Kids in Tow2"
"Pot The Jus" Originator :-)
Neenah Wi
#ItsBu'sfault
#FARCON Marine CC Core!
-
- Ensign
- Posts: 3
- Joined: Fri Aug 04, 2023 11:25 am
- Location: Jupiter Florida
- Contact:
Re: 8.1GXi-e flush adapter
I have a 2002 8.1L Gi. I have a hose on the port side of my motor with a removable cap to flush out the motor. I've read the same as the original poster, do not run the motor while flushing. I tried flushing using muffs but was not getting any water out the exhaust...
Who is online
Users browsing this forum: Google [Bot] and 0 guests