Another….over the tower cover
Another….over the tower cover
As you know my boat lives on a trailer under the stars 99% of the year. I purchased a winter cover for my 220 then a summer over the tower cover.
I just got a cover made for my R7. The material is top gun and it keeps the water out. This time, I had side skirts put onto zippers.
I just got a cover made for my R7. The material is top gun and it keeps the water out. This time, I had side skirts put onto zippers.
You do not have the required permissions to view the files attached to this post.
2016 R7 VP 380
2014 220S Merc 5.0L (sold)
Columbus, OH
Chautauqua, NY
2014 220S Merc 5.0L (sold)
Columbus, OH
Chautauqua, NY
Re: Another….over the tower cover
Nice AJC!
2002 Cobalt 262
&
2005 Cobalt 263
496 MagHO
(sold )
Erie, PA
Currently boatless (for now)
will fly for food
(CChat moderator)
&
2005 Cobalt 263
496 MagHO
(sold )
Erie, PA
Currently boatless (for now)
will fly for food
(CChat moderator)
-
- Commander
- Posts: 197
- Joined: Sun May 23, 2021 6:53 pm
- Contact:
Re: Another….over the tower cover
Awesome cover, are you able get it on without fairly easy? Assume you have to at least stand on the seats?
Re: Another….over the tower cover
Yes, very easy to get the cover on and over the tower. I can do it in the same amount of time as putting on the mooring cover.Lifelongbtr wrote: ↑Sat Aug 12, 2023 12:05 am Awesome cover, are you able get it on without fairly easy? Assume you have to at least stand on the seats?
2016 R7 VP 380
2014 220S Merc 5.0L (sold)
Columbus, OH
Chautauqua, NY
2014 220S Merc 5.0L (sold)
Columbus, OH
Chautauqua, NY
-
- Commander
- Posts: 197
- Joined: Sun May 23, 2021 6:53 pm
- Contact:
Re: Another….over the tower cover
I thought really hard about having one made and instead made a cover for the tower itself when it will sit for more than week. When my mooring cover dies, I’ll probably go this route. I really want lightweight material that’s easy to put on and take off especially for the times when I’ll back to the boat the following day. I hate the boat seeing daylight when it’s not being used.ajcampen wrote: ↑Sat Aug 12, 2023 7:05 amYes, very easy to get the cover on and over the tower. I can do it in the same amount of time as putting on the mooring cover.Lifelongbtr wrote: ↑Sat Aug 12, 2023 12:05 am Awesome cover, are you able get it on without fairly easy? Assume you have to at least stand on the seats?
Hopefully aftermarket companies will start making these at some point, my old boats seemed there were a ton of options, already custom fit, inexpensive…
- Krob1114
- Vice Admiral
- Posts: 1796
- Joined: Sun Jun 09, 2019 8:03 am
- Location: Greer’s Ferry Lake, AR
- Contact:
Re: Another….over the tower cover
Nice cover AJ.
You show the old cover on the boat outdoors.
You show the new cover on the boat on the boat indoors.
Interesting.
You show the old cover on the boat outdoors.
You show the new cover on the boat on the boat indoors.
Interesting.
2019 Cobalt R3 @ Greers Ferry Lake, AR
Home in Hernando, MS
Home in Hernando, MS
Re: Another….over the tower cover
MKes sense right?
Those pics are from the guy who made it
2016 R7 VP 380
2014 220S Merc 5.0L (sold)
Columbus, OH
Chautauqua, NY
2014 220S Merc 5.0L (sold)
Columbus, OH
Chautauqua, NY
-
- Captain
- Posts: 362
- Joined: Tue Aug 11, 2020 3:49 pm
- Location: New Hampshire
- Contact:
Re: Another….over the tower cover
Where did you have it made?
2005 Cobalt 24SX 350Mag
2010 Key West 186 DC - retired
Lake Winnipesaukee
2010 Key West 186 DC - retired
Lake Winnipesaukee
Re: Another….over the tower cover
A shop near Columbus oh
2016 R7 VP 380
2014 220S Merc 5.0L (sold)
Columbus, OH
Chautauqua, NY
2014 220S Merc 5.0L (sold)
Columbus, OH
Chautauqua, NY
Who is online
Users browsing this forum: No registered users and 0 guests