Need help with R6 surf trailer prop guard
-
MnLakeBum
- Rear Admiral

- Posts: 835
- Joined: Fri Jun 22, 2018 8:21 am
- Location: Minnesota
- Has thanked: 1 time
- Been thanked: 2 times
- Contact:
Re: Need help with R6 surf trailer prop guard
I’ve had zero issues launching my R5 Surf on and off my Phoenix trailer in the 3+ years I’ve owned it. This summer with the extreme MN drought, there are boat launches that are too shallow to even float a fully trimmed R5 Surf without hitting the props. As long as the water at the launch is deep enough, I have zero issues loading or unloading the boat on and off the trailer.
You do not have the required permissions to view the files attached to this post.
2018 R5 Surf 380 VP
2016 Marker One 28’ with 350 Verado
2019 Boston Whaler 230 Vantage 300 Verado
2016 Marker One 28’ with 350 Verado
2019 Boston Whaler 230 Vantage 300 Verado
- Krob1114
- Vice Admiral

- Posts: 1876
- Joined: Sun Jun 09, 2019 8:03 am
- Location: Greer’s Ferry Lake, AR
- Contact:
Re: Need help with R6 surf trailer prop guard
What is that Bum...you posted a photo without a great sky line?

2019 Cobalt R3 @ Greers Ferry Lake, AR
Home in Hernando, MS
Home in Hernando, MS
- Big Block Power
- Fleet Admiral

- Posts: 17930
- Joined: Sat May 07, 2016 8:05 pm
- Location: Neenah,Wi
- Contact:
Re: Need help with R6 surf trailer prop guard
Yes it's fine if you go straight on it. But if you have current or you don't come at it dead on and you make a correction and turn the wheel bad things can happen. That's all I'm saying. Be careful surf boys.MnLakeBum wrote: Thu Aug 26, 2021 9:17 pm I’ve had zero issues launching my R5 Surf on and off my Phoenix trailer in the 3+ years I’ve owned it. This summer with the extreme MN drought, there are boat launches that are too shallow to even float a fully trimmed R5 Surf without hitting the props. As long as the water at the launch is deep enough, I have zero issues loading or unloading the boat on and off the trailer.
03Cobalt220 8.1gxi DP
"Kids in Tow2"
"Pot The Jus" Originator :-)
Neenah Wi
#ItsBu'sfault
#FARCON Marine CC Core!
"Kids in Tow2"
"Pot The Jus" Originator :-)
Neenah Wi
#ItsBu'sfault
#FARCON Marine CC Core!
-
katoom450
- Commander

- Posts: 55
- Joined: Wed Aug 04, 2021 7:44 pm
- Location: Chattanooga Tennessee
- Contact:
Re: Need help with R6 surf trailer prop guard
I considered Phoenix but the price went from 10800 to. 13800 because I had them add bow steps and better axles. (R6 surf is heavy)MnLakeBum wrote: Thu Aug 26, 2021 9:17 pm I’ve had zero issues launching my R5 Surf on and off my Phoenix trailer in the 3+ years I’ve owned it. This summer with the extreme MN drought, there are boat launches that are too shallow to even float a fully trimmed R5 Surf without hitting the props. As long as the water at the launch is deep enough, I have zero issues loading or unloading the boat on and off the trailer.
Load master was 9000 including better axles, but I’m waiting on the final price for steps, prop guard, and guide poles. I’ve already decided to go with Loadmaster though. They have been super accommodating and professional.
1998 190 350 merc (Sold)
1998 252 VP 7.3GXI (Sold)
2020 R5 Surf VP350 (Sold)
2022 R6 Surf VP380
1998 252 VP 7.3GXI (Sold)
2020 R5 Surf VP350 (Sold)
2022 R6 Surf VP380
-
katoom450
- Commander

- Posts: 55
- Joined: Wed Aug 04, 2021 7:44 pm
- Location: Chattanooga Tennessee
- Contact:
Re: Need help with R6 surf trailer prop guard
Forgot to mention that I’m going with electric brakes this time since I have the choice. I like the electric for a couple of reasons. They work when you are backing down the ramp, and they will not automatically engage when backing up a hill! This is helpful unless I’m trying to impress my teenagers by doing full drift in reverse while backing the trailer
1998 190 350 merc (Sold)
1998 252 VP 7.3GXI (Sold)
2020 R5 Surf VP350 (Sold)
2022 R6 Surf VP380
1998 252 VP 7.3GXI (Sold)
2020 R5 Surf VP350 (Sold)
2022 R6 Surf VP380
Re: Need help with R6 surf trailer prop guard
Good choice! I went with standard electric brakes for the same reason plus they are easy to repair if and when needed. Some go with EOH but my trailer will never see salt so I didn’t see the need to spend the money to upgrade something that I will never use. I’m not going to tell you what I paid for my Loadmaster a little over a year and a half ago...katoom450 wrote: Mon Aug 30, 2021 6:26 am Forgot to mention that I’m going with electric brakes this time since I have the choice. I like the electric for a couple of reasons. They work when you are backing down the ramp, and they will not automatically engage when backing up a hill! This is helpful unless I’m trying to impress my teenagers by doing full drift in reverse while backing the trailer![]()
-
katoom450
- Commander

- Posts: 55
- Joined: Wed Aug 04, 2021 7:44 pm
- Location: Chattanooga Tennessee
- Contact:
Re: Need help with R6 surf trailer prop guard
Well, I just got my quote from Loadmaster. I got front steps, 16 inch aluminum wheels, transom tie downs, extended frame rails, prop guards, guild poles for BBPSnowman8 wrote: Mon Aug 30, 2021 4:36 pmGood choice! I went with standard electric brakes for the same reason plus they are easy to repair if and when needed. Some go with EOH but my trailer will never see salt so I didn’t see the need to spend the money to upgrade something that I will never use. I’m not going to tell you what I paid for my Loadmaster a little over a year and a half ago...katoom450 wrote: Mon Aug 30, 2021 6:26 am Forgot to mention that I’m going with electric brakes this time since I have the choice. I like the electric for a couple of reasons. They work when you are backing down the ramp, and they will not automatically engage when backing up a hill! This is helpful unless I’m trying to impress my teenagers by doing full drift in reverse while backing the trailer![]()
They were still cheaper than Heritage at the time.
All that and still way cheaper than Phoenix
1998 190 350 merc (Sold)
1998 252 VP 7.3GXI (Sold)
2020 R5 Surf VP350 (Sold)
2022 R6 Surf VP380
1998 252 VP 7.3GXI (Sold)
2020 R5 Surf VP350 (Sold)
2022 R6 Surf VP380
- Big Block Power
- Fleet Admiral

- Posts: 17930
- Joined: Sat May 07, 2016 8:05 pm
- Location: Neenah,Wi
- Contact:
Re: Need help with R6 surf trailer prop guard
katoom450 wrote: Mon Aug 30, 2021 5:21 pmWell, I just got my quote from Loadmaster. I got front steps, 16 inch aluminum wheels, transom tie downs, extended frame rails, prop guards, guild poles for BBPSnowman8 wrote: Mon Aug 30, 2021 4:36 pmGood choice! I went with standard electric brakes for the same reason plus they are easy to repair if and when needed. Some go with EOH but my trailer will never see salt so I didn’t see the need to spend the money to upgrade something that I will never use. I’m not going to tell you what I paid for my Loadmaster a little over a year and a half ago...katoom450 wrote: Mon Aug 30, 2021 6:26 am Forgot to mention that I’m going with electric brakes this time since I have the choice. I like the electric for a couple of reasons. They work when you are backing down the ramp, and they will not automatically engage when backing up a hill! This is helpful unless I’m trying to impress my teenagers by doing full drift in reverse while backing the trailer![]()
They were still cheaper than Heritage at the time.
and the bottom bunk has some sort of pvc or something slick to reduce friction and help protect the black hull!
All that and still way cheaper than Phoenix![]()
03Cobalt220 8.1gxi DP
"Kids in Tow2"
"Pot The Jus" Originator :-)
Neenah Wi
#ItsBu'sfault
#FARCON Marine CC Core!
"Kids in Tow2"
"Pot The Jus" Originator :-)
Neenah Wi
#ItsBu'sfault
#FARCON Marine CC Core!
-
mdadgar
- Rear Admiral

- Posts: 566
- Joined: Mon Aug 13, 2018 12:22 pm
- Location: SF Bay Area
- Been thanked: 1 time
- Contact:
Re: Need help with R6 surf trailer prop guard
I recently converted my Pacific trailer to EOH brakes (it was supposed to be EOH when I ordered it but we converted it back to surge when I picked it up because we discovered at the last minute that my brake controller could not do EOH).Snowman8 wrote: Mon Aug 30, 2021 4:36 pm Good choice! I went with standard electric brakes for the same reason plus they are easy to repair if and when needed. Some go with EOH but my trailer will never see salt so I didn’t see the need to spend the money to upgrade something that I will never use.
It's night and day better than the surge brakes and also noticeably better than the standard electric brakes on my race trailer.
As long as you are going to the time and expense, I'd do EOH.
- Mark
Mark Dadgar
2013 Cobalt A25, 6.0 VP 380hp "More Cowbell"
Monte Sereno, CA (winter) | Lake Don Pedro (summer)
Boats are for when I'm not racing cars
2013 Cobalt A25, 6.0 VP 380hp "More Cowbell"
Monte Sereno, CA (winter) | Lake Don Pedro (summer)
Boats are for when I'm not racing cars
-
katoom450
- Commander

- Posts: 55
- Joined: Wed Aug 04, 2021 7:44 pm
- Location: Chattanooga Tennessee
- Contact:
Re: Need help with R6 surf trailer prop guard
I agree! Having EOH would be much better, but it’s really not necessary for me because my tow rig is a 11000lb Ford dually. I haul WAY heavier things on a daily basis so I’m use to keeping my distance and driving defensively. Towing with a dually is night and day different over single rear wheel rigs for sure!mdadgar wrote: Mon Aug 30, 2021 6:58 pmI recently converted my Pacific trailer to EOH brakes (it was supposed to be EOH when I ordered it but we converted it back to surge when I picked it up because we discovered at the last minute that my brake controller could not do EOH).Snowman8 wrote: Mon Aug 30, 2021 4:36 pm Good choice! I went with standard electric brakes for the same reason plus they are easy to repair if and when needed. Some go with EOH but my trailer will never see salt so I didn’t see the need to spend the money to upgrade something that I will never use.
It's night and day better than the surge brakes and also noticeably better than the standard electric brakes on my race trailer.
As long as you are going to the time and expense, I'd do EOH.
- Mark
1998 190 350 merc (Sold)
1998 252 VP 7.3GXI (Sold)
2020 R5 Surf VP350 (Sold)
2022 R6 Surf VP380
1998 252 VP 7.3GXI (Sold)
2020 R5 Surf VP350 (Sold)
2022 R6 Surf VP380
Re: Need help with R6 surf trailer prop guard
As long as you are adding options. Might as well add a few lights too! Here’s mine lit up at night.katoom450 wrote: Mon Aug 30, 2021 5:21 pmWell, I just got my quote from Loadmaster. I got front steps, 16 inch aluminum wheels, transom tie downs, extended frame rails, prop guards, guild poles for BBPSnowman8 wrote: Mon Aug 30, 2021 4:36 pmGood choice! I went with standard electric brakes for the same reason plus they are easy to repair if and when needed. Some go with EOH but my trailer will never see salt so I didn’t see the need to spend the money to upgrade something that I will never use. I’m not going to tell you what I paid for my Loadmaster a little over a year and a half ago...katoom450 wrote: Mon Aug 30, 2021 6:26 am Forgot to mention that I’m going with electric brakes this time since I have the choice. I like the electric for a couple of reasons. They work when you are backing down the ramp, and they will not automatically engage when backing up a hill! This is helpful unless I’m trying to impress my teenagers by doing full drift in reverse while backing the trailer![]()
They were still cheaper than Heritage at the time.
and the bottom bunk has some sort of pvc or something slick to reduce friction and help protect the black hull!
All that and still way cheaper than Phoenix![]()
You do not have the required permissions to view the files attached to this post.
- AsLan7
- Fleet Admiral

- Posts: 11519
- Joined: Sat Jul 29, 2017 10:58 am
- Location: Erie PA
- Has thanked: 1 time
- Been thanked: 6 times
- Contact:
Re: Need help with R6 surf trailer prop guard
.
Nice S8

Nice S8
2002 Cobalt 262
&
2005 Cobalt 263
496 MagHO
(sold )
Erie, PA
Currently boatless (for now)
will fly for food
(CChat moderator)
&
2005 Cobalt 263
496 MagHO
(sold )
Erie, PA
Currently boatless (for now)
will fly for food
(CChat moderator)
- Big Block Power
- Fleet Admiral

- Posts: 17930
- Joined: Sat May 07, 2016 8:05 pm
- Location: Neenah,Wi
- Contact:
Re: Need help with R6 surf trailer prop guard
Is that a Christmas tree 

03Cobalt220 8.1gxi DP
"Kids in Tow2"
"Pot The Jus" Originator :-)
Neenah Wi
#ItsBu'sfault
#FARCON Marine CC Core!
"Kids in Tow2"
"Pot The Jus" Originator :-)
Neenah Wi
#ItsBu'sfault
#FARCON Marine CC Core!
Re: Need help with R6 surf trailer prop guard
Maybe I should have gone with the RGB LED’s!
- Big Block Power
- Fleet Admiral

- Posts: 17930
- Joined: Sat May 07, 2016 8:05 pm
- Location: Neenah,Wi
- Contact:
Re: Need help with R6 surf trailer prop guard
Oh I never saw his with the lights on. It looks nice.Snowman8 wrote: Sun Sep 05, 2021 8:47 amMaybe I should have gone with the RGB LED’s!I do have to give credit to Tuscany! His is the same.
03Cobalt220 8.1gxi DP
"Kids in Tow2"
"Pot The Jus" Originator :-)
Neenah Wi
#ItsBu'sfault
#FARCON Marine CC Core!
"Kids in Tow2"
"Pot The Jus" Originator :-)
Neenah Wi
#ItsBu'sfault
#FARCON Marine CC Core!
Who is online
Users browsing this forum: No registered users and 29 guests