Oil change
-
tarachanowicz
- Commander

- Posts: 64
- Joined: Wed Oct 04, 2017 3:57 pm
- Location: Michigan
- Contact:
Oil change
Looking for some info on recommended engine oil. My dealer installs rotella oil, I have heard that rotella has zinc in it and can destroy cat converters by post igniting in the converter element. I want to go synthetic and looking to use mobil 1 15w50. Recommended by a buddy of mine. Any suggestions I heard sae 30 or even 10w30 is not a good weight to use. Any suggestions. 2014 220 5.0
Re: Oil change
Do Volvo owners ever buy the Volvo oil? I would use there products while in warranty period exclusively so if their is a problem they don't kill you on oil used
2016 R7 VP 380
2014 220S Merc 5.0L (sold)
Columbus, OH
Chautauqua, NY
2014 220S Merc 5.0L (sold)
Columbus, OH
Chautauqua, NY
Re: Oil change
I use Mobil 15/50.
2001 262 502 GXI (because it sounds better than an 8.2)
From the Land of the Red Man
"Black Boats Matter"
#FARCON Marine / CC Core!
From the Land of the Red Man
"Black Boats Matter"
#FARCON Marine / CC Core!
Re: Oil change
Maybe it's me...
I've used Quaker, Pennzoil, Mobil, Shell, Valvoline, Chevron, ConocoPhillips, Texaco...and on and on and on.
Somehow in all of my years, and against dire warnings of impending catastrophic failures to be, I've never seen an oil related issue..
Just change it regularly, and allow for a warm up before hammering the throttle.
So to answer your question, I agree totally with AJ. Use their products, and if, if there is a problem, you have a place to point your finger, instead of the dealer pointing their finger at you.
I've used Quaker, Pennzoil, Mobil, Shell, Valvoline, Chevron, ConocoPhillips, Texaco...and on and on and on.
Somehow in all of my years, and against dire warnings of impending catastrophic failures to be, I've never seen an oil related issue..
Just change it regularly, and allow for a warm up before hammering the throttle.
So to answer your question, I agree totally with AJ. Use their products, and if, if there is a problem, you have a place to point your finger, instead of the dealer pointing their finger at you.
2017 Cobalt R7
"Cobalt" Blue
6.2L VP 380 or 430
#FARCON Marine
"Cobalt" Blue
6.2L VP 380 or 430
#FARCON Marine
- Big Block Power
- Fleet Admiral

- Posts: 17930
- Joined: Sat May 07, 2016 8:05 pm
- Location: Neenah,Wi
- Contact:
Re: Oil change
Yes 100% of the time. Or Merc oil in a merc. I'm a big believer in using manufactures oils and filters. Just me. Both brands have special additives for our environment. I heard rottella doesn't have zinc anymore. I also use BG oil additive MOA. It's great stuff in all of my 4 stroke engines.ajcampen wrote: Sun Oct 22, 2017 10:04 pm Do Volvo owners ever buy the Volvo oil? I would use there products while in warranty period exclusively so if their is a problem they don't kill you on oil used
03Cobalt220 8.1gxi DP
"Kids in Tow2"
"Pot The Jus" Originator :-)
Neenah Wi
#ItsBu'sfault
#FARCON Marine CC Core!
"Kids in Tow2"
"Pot The Jus" Originator :-)
Neenah Wi
#ItsBu'sfault
#FARCON Marine CC Core!
Re: Oil change
I really have no idea what oil my marina uses, and I couldn’t care less. I’m responsible and contracted in bringing my boat to them for certified factory service. In turn, they take full responsible for the quality of my engine service fluids.
That gives you a fighting chance if there is a warranty issue.
You'll love this BB...
I try to stay loyal to my vehicle dealerships. Ford guy with a nice Ford dealership. I switched to GMC for one truck for a change up and I have to spread the biz around since they all deal with our deli.
First truck service, no grease. Second service, no grease. Third service at a Chevy dealership, no grease...
I had to tell them every time to bring it back in and grease it..
So, at least around here, I trust the flunkies at a quick oil change more than my local GM dealers.. they must hire the quick oil change rejects for their oil service "techs".
I still have reservations about our marina's cleanliness in regards to the boat, but my first Cobalt service with them was excellent.
That gives you a fighting chance if there is a warranty issue.
You'll love this BB...
I try to stay loyal to my vehicle dealerships. Ford guy with a nice Ford dealership. I switched to GMC for one truck for a change up and I have to spread the biz around since they all deal with our deli.
First truck service, no grease. Second service, no grease. Third service at a Chevy dealership, no grease...
I had to tell them every time to bring it back in and grease it..
So, at least around here, I trust the flunkies at a quick oil change more than my local GM dealers.. they must hire the quick oil change rejects for their oil service "techs".
I still have reservations about our marina's cleanliness in regards to the boat, but my first Cobalt service with them was excellent.
2017 Cobalt R7
"Cobalt" Blue
6.2L VP 380 or 430
#FARCON Marine
"Cobalt" Blue
6.2L VP 380 or 430
#FARCON Marine
Re: Oil change
Totally agree Tusc. On any forum in any oil thread you'll get 82 different opinions on what oil to use, but I bet Driller has some good insight on this subject.Tuscany wrote: Mon Oct 23, 2017 5:28 am Maybe it's me...
I've used Quaker, Pennzoil, Mobil, Shell, Valvoline, Chevron, ConocoPhillips, Texaco...and on and on and on.
Somehow in all of my years, and against dire warnings of impending catastrophic failures to be, I've never seen an oil related issue..
Just change it regularly, and allow for a warm up before hammering the throttle.
So to answer your question, I agree totally with AJ. Use their products, and if, if there is a problem, you have a place to point your finger, instead of the dealer pointing their finger at you.
For me, it all comes out of the same ground and as long as its a quality refined oil it'll work well. The only difference is the additives. Warm up the engine and keep it clean and any of it will do fine. I've raced motorcycles about all my life, and the manufacturer always claims to have the best "specific" oil. Of course they mark it up 40 or 50%... Then when you need to add or change you have to make a special trip to find the stuff.
For me its about a quality oil that is easy to obtain. Years ago I switched over to Mobil for all my vehicles and Lucas for my bikes. Mainly because 1. Its good. 2. Its easy to find.
I have a 96 Toyota Land Cruiser with over 200,000 miles. Pull the dipstick out and the oil is still clear...
Under a warranty issue I agree.. Use what they say. When the warranty runs out switch to whatever you want.
2001 262 502 GXI (because it sounds better than an 8.2)
From the Land of the Red Man
"Black Boats Matter"
#FARCON Marine / CC Core!
From the Land of the Red Man
"Black Boats Matter"
#FARCON Marine / CC Core!
Re: Oil change
True enough YT.
Oil marketing as of late insults the intellect of even the average earth worm..
I SMH at the marketing ideas in the past few years. BS “Designer” oils for every specific need. The best BS marketing ploy is now the “one year” oil change, because somehow, that oil lasts longer.
. Even re-refined oils are now considered “green” for the enviormentally sensitive. It was considered garbage a few years ago. Now, we are somehow convinced Valvoline alone is doing the environment a favor.
This type of target marketing naturally makes a buyer feel that there are mostly wrong choices that may cause harm.
Any choice will work fine.
Two enemies. Heat and wear.
Heat, use synthetic oils which IMO, is very cheap insurance. As for wear, change it regularly, and not annually.
Oil marketing as of late insults the intellect of even the average earth worm..
I SMH at the marketing ideas in the past few years. BS “Designer” oils for every specific need. The best BS marketing ploy is now the “one year” oil change, because somehow, that oil lasts longer.
This type of target marketing naturally makes a buyer feel that there are mostly wrong choices that may cause harm.
Any choice will work fine.
Two enemies. Heat and wear.
Heat, use synthetic oils which IMO, is very cheap insurance. As for wear, change it regularly, and not annually.
2017 Cobalt R7
"Cobalt" Blue
6.2L VP 380 or 430
#FARCON Marine
"Cobalt" Blue
6.2L VP 380 or 430
#FARCON Marine
- AsLan7
- Fleet Admiral

- Posts: 11525
- Joined: Sat Jul 29, 2017 10:58 am
- Location: Erie PA
- Has thanked: 1 time
- Been thanked: 6 times
- Contact:
Re: Oil change
.
I want to go synthetic and looking to use mobil 1 15w50.
.
Use manufacturer's brand while in warranty period so as to be blameless if engine warranty claim arises.
Once out of warranty, then....
http://www.cobaltchat.com/viewtopic.php ... lood#p8919
.
2002 Cobalt 262
&
2005 Cobalt 263
496 MagHO
(sold )
Erie, PA
Currently boatless (for now)
will fly for food
(CChat moderator)
&
2005 Cobalt 263
496 MagHO
(sold )
Erie, PA
Currently boatless (for now)
will fly for food
(CChat moderator)
Re: Oil change
Absolutely agree
2001 262 502 GXI (because it sounds better than an 8.2)
From the Land of the Red Man
"Black Boats Matter"
#FARCON Marine / CC Core!
From the Land of the Red Man
"Black Boats Matter"
#FARCON Marine / CC Core!
Re: Oil change
Anyone going to see if Deb has oil for 6$ a qrt
2016 R7 VP 380
2014 220S Merc 5.0L (sold)
Columbus, OH
Chautauqua, NY
2014 220S Merc 5.0L (sold)
Columbus, OH
Chautauqua, NY
-
tarachanowicz
- Commander

- Posts: 64
- Joined: Wed Oct 04, 2017 3:57 pm
- Location: Michigan
- Contact:
Re: Oil change
Funny thing my cobalt dealer itself uses wix filter and the rotella 15 40 oil on every oil change they say. Doubt warranty will be good if dealer does it? I questioned my cobalt dealer about warranty and they said that they use oils that meet minimum required specs of volvo and said they can't void warranty . They said mobil 1 is the best oil to use and exceeds volvo specs.
Re: Oil change
They are using a diesel oil in a gasoline engine?
Oh brother..
Oh brother..
2017 Cobalt R7
"Cobalt" Blue
6.2L VP 380 or 430
#FARCON Marine
"Cobalt" Blue
6.2L VP 380 or 430
#FARCON Marine
-
tarachanowicz
- Commander

- Posts: 64
- Joined: Wed Oct 04, 2017 3:57 pm
- Location: Michigan
- Contact:
Re: Oil change
Said they use it in all their oil changes and said never had a problem. I heard it contains zinc and when used with converter engines can post ignite in the converter and ruin it
Who is online
Users browsing this forum: Baidu [Spider], Bing [Bot] and 50 guests

