2005 272 fuel cap

[DFWdude]

The SS wire that attaches my gas cap to the fill neck is frayed. Id like to replace it, but dont think I can easily access the fill neck to detach the bottom end of the cable.

Any ideas / suggestions?

Thx

[SAB220]

Can you get to the to the un-frayed part? I would treat it like a ground wire in your house. Cut it and crimp it with a brass ferrule.

Easy-Twist Copper Crimp Sleeve Wire Connector, 18-10 AWG Wire Range
Problem is you need to find the right Ferrule Crimping Tool.

[DFWdude]

I dont think i’d be able to get crimps inside the fill neck

[SAB220]

Understood consider a new cap outside mount/wire through the fiberglass - (greatlakesskipper.com) or buy several plastic caps in place some onboard and move on and continue with the summer. good luck

[Titaniumboy]

These pictures may give you a better idea of what you’re dealing with (assuming you have the “pop up” style gas cap). The one on the left is a 1-1/2” angled gas fill and the one on the right is a 2” straight gas fill. The spring is about 3”-3.5” long.

The gas fill on my boat is neither of these and is a 2” angled version.

5A4C32A5-5623-418F-AA00-ECA01BAD988C.jpeg

DCED3191-3AEF-4237-AA74-6AB96D8004E7.jpeg

[DFWdude]

That does help, thanks. I have the one on the left.

[SAB220]

viewtopic.php?p=84548&sid=e0fde411353e9 ... 07f#p84548

[DFWdude]

Revisiting this; anyone know how to get access to the fill neck? How do the side seat back cushions come off on the starboard side?