My 262 Build
Re: My 262 Build
So anybody know what this panel is for or where it goes. I dont see anything missing a panel.
Also inspected the anchor and rope today. Guessing the anchor is 28lbs and it seems fine. I am not thrilled with the rope but it doesn't seem to be compromised, so we will keep it for now.
Also inspected the anchor and rope today. Guessing the anchor is 28lbs and it seems fine. I am not thrilled with the rope but it doesn't seem to be compromised, so we will keep it for now.
You do not have the required permissions to view the files attached to this post.
2001 262 "Makin IT"
Re: My 262 Build
Also, I pulled out a couple of the carpeted wood cross braces on the horn side today. Going to re glue the carpet to the wood before re installing. Reason for pulling was to see if it might help me get to that dang horn.
2001 262 "Makin IT"
- Cobalt262
- Commander

- Posts: 167
- Joined: Fri Aug 18, 2017 8:53 am
- Location: Lake Winnipesaukee, NH
- Contact:
Re: My 262 Build
Hey juddmyers, thanks for the stats on your project. I might be doing mine soon because of your inspiration.juddmyers wrote: Wed Mar 21, 2018 4:38 pm 20180321_144037.jpg
So anybody know what this panel is for or where it goes. I dont see anything missing a panel.
Also inspected the anchor and rope today. Guessing the anchor is 28lbs and it seems fine. I am not thrilled with the rope but it doesn't seem to be compromised, so we will keep it for now.
That white board fits in back starboard side storage where the ski pilot is. I don't know its use.
Jeff
2001 Cobalt 262 w/Arch (2017 - present)
1990 Cobalt 21BR (2008 - 2017)
Lake Winnipesaukee, NH
1990 Cobalt 21BR (2008 - 2017)
Lake Winnipesaukee, NH
Re: My 262 Build
Cobalt262 wrote: Wed Mar 21, 2018 4:59 pmHey juddmyers, thanks for the stats on your project. I might be doing mine soon because of your inspiration.juddmyers wrote: Wed Mar 21, 2018 4:38 pm 20180321_144037.jpg
So anybody know what this panel is for or where it goes. I dont see anything missing a panel.
Also inspected the anchor and rope today. Guessing the anchor is 28lbs and it seems fine. I am not thrilled with the rope but it doesn't seem to be compromised, so we will keep it for now.
That white board fits in back starboard side storage where the ski pilot is. I don't know its use.
Jeff
Hmmm.. that is interesting. Like you, not sure what purpose it would serve.
2001 262 "Makin IT"
- AsLan7
- Fleet Admiral

- Posts: 11505
- Joined: Sat Jul 29, 2017 10:58 am
- Location: Erie PA
- Has thanked: 1 time
- Been thanked: 5 times
- Contact:
Re: My 262 Build
.juddmyers wrote: Wed Mar 21, 2018 5:18 pmCobalt262 wrote: Wed Mar 21, 2018 4:59 pmHey juddmyers, thanks for the stats on your project. I might be doing mine soon because of your inspiration.juddmyers wrote: Wed Mar 21, 2018 4:38 pm 20180321_144037.jpg
So anybody know what this panel is for or where it goes. I dont see anything missing a panel.
Also inspected the anchor and rope today. Guessing the anchor is 28lbs and it seems fine. I am not thrilled with the rope but it doesn't seem to be compromised, so we will keep it for now.
That white board fits in back starboard side storage where the ski pilot is. I don't know its use.
Jeff
Hmmm.. that is interesting. Like you, not sure what purpose it would serve.
Like mentioned above, that board allowed the user to have a sort of shelf option under the starboard swim pad hatch. It separated that storage compartment into a "top" and "bottom" option.
Not very useful really so Cobalt only offered this on the 2000 and 2001 260 series. They eliminated it starting in 2002.
.
2002 Cobalt 262
&
2005 Cobalt 263
496 MagHO
(sold )
Erie, PA
Currently boatless (for now)
will fly for food
(CChat moderator)
&
2005 Cobalt 263
496 MagHO
(sold )
Erie, PA
Currently boatless (for now)
will fly for food
(CChat moderator)
- Cobalt262
- Commander

- Posts: 167
- Joined: Fri Aug 18, 2017 8:53 am
- Location: Lake Winnipesaukee, NH
- Contact:
Re: My 262 Build
My first thought was a cutting board, because I have a cutting board made of similar material, but Cobalt owners are not buying a fishing boat. I think AsLan7''s answer makes the most sense.
Thanks again for the pics juddmyers. Please keep them coming.
Thanks again for the pics juddmyers. Please keep them coming.
2001 Cobalt 262 w/Arch (2017 - present)
1990 Cobalt 21BR (2008 - 2017)
Lake Winnipesaukee, NH
1990 Cobalt 21BR (2008 - 2017)
Lake Winnipesaukee, NH
Re: My 262 Build
Just an update. Upholstery is still out. They have had it for a little over 2 weeks now. I was originally told that they like to turn around in about 2 weeks, so I am hopeful that it will be back soon. I guess it isn't a huge rush as it has done nothing but rain here in western Kentucky. Going to stop raining after today for this week but temps will be in the 50s.
Did check the oil via the dip stick a few days ago and it looks brand new. Betting they put new in when they winterized it. Looks super clean. So now I am debating on whether or not I should get it changed for the season or wait.
Still waiting on wet sounds to ship their stereo remote, so that I can get it installed on the swim platform also.
Did check the oil via the dip stick a few days ago and it looks brand new. Betting they put new in when they winterized it. Looks super clean. So now I am debating on whether or not I should get it changed for the season or wait.
Still waiting on wet sounds to ship their stereo remote, so that I can get it installed on the swim platform also.
2001 262 "Makin IT"
Re: My 262 Build
I've got a similar one on my boat. In the wet storage it has netting, mine sets in the bottom of the netting to make a hard bottom.juddmyers wrote: Wed Mar 21, 2018 4:38 pm
So anybody know what this panel is for or where it goes. I dont see anything missing a panel.
2011 242 Volvo Penta 8.1 Gi
"DIGGIN' IT"
"DIGGIN' IT"
- thunder550
- Vice Admiral

- Posts: 2246
- Joined: Sun Oct 08, 2017 2:16 pm
- Location: Scottsdale, AZ
- Contact:
Re: My 262 Build
Did they give you any service records where you can validate? Does it smell like fresh oil? If they stayed up on maintenance, it's usually standard practice to change fluids before putting into storage so any water that might be in the oil won't sit against the metal parts all winter long.juddmyers wrote: Tue Apr 03, 2018 9:15 am Did check the oil via the dip stick a few days ago and it looks brand new. Betting they put new in when they winterized it. Looks super clean. So now I am debating on whether or not I should get it changed for the season or wait.
1995 Cobalt 252 - 502 Mag EFI - Bravo 1 - 21" Revolution 4
- Big Block Power
- Fleet Admiral

- Posts: 17930
- Joined: Sat May 07, 2016 8:05 pm
- Location: Neenah,Wi
- Contact:
Re: My 262 Build
I'm sure it's new oil like the t
Terminator said. Most places change oil when they winterize it. I like using BG Moa additive as it sticks to the the metal pieces and protects it from premature wear.
Terminator said. Most places change oil when they winterize it. I like using BG Moa additive as it sticks to the the metal pieces and protects it from premature wear.
03Cobalt220 8.1gxi DP
"Kids in Tow2"
"Pot The Jus" Originator :-)
Neenah Wi
#ItsBu'sfault
#FARCON Marine CC Core!
"Kids in Tow2"
"Pot The Jus" Originator :-)
Neenah Wi
#ItsBu'sfault
#FARCON Marine CC Core!
Re: My 262 Build
I went with the standalone wet sounds controller, runs my speaker rings, gunwale, and underwater lights. As soon as I figure out how to convert my courtesy lights I'm hook them up also. You see it mounted to right of my stereo remote.juddmyers wrote: Thu Mar 08, 2018 9:28 am With the radio install, I did also have him install a wet sounds rgb controller to control the light rings around my speakers and the lights in the speakers themselves. This is temporary for me, I think. My wet sounds radio is capable of doing that with a $500 module. I didn't want to spend the 500 at the time so I had him add the $100 stand alone controller.
.
You do not have the required permissions to view the files attached to this post.
2011 242 Volvo Penta 8.1 Gi
"DIGGIN' IT"
"DIGGIN' IT"
Re: My 262 Build
Driller wrote: Fri Apr 06, 2018 4:06 pmI went with the standalone wet sounds controller, runs my speaker rings, gunwale, and underwater lights. As soon as I figure out how to convert my courtesy lights I'm hook them up also. You see it mounted to right of my stereo remote.juddmyers wrote: Thu Mar 08, 2018 9:28 am With the radio install, I did also have him install a wet sounds rgb controller to control the light rings around my speakers and the lights in the speakers themselves. This is temporary for me, I think. My wet sounds radio is capable of doing that with a $500 module. I didn't want to spend the 500 at the time so I had him add the $100 stand alone controller.
Yea, I can hide that controller and my wet sounds head unit will then be the interface for my lights. I'll eventually do that.
2001 262 "Makin IT"
Re: My 262 Build
Yes, oil looks and smells fine. I can not get service records, the place I purchased from was going out of business. Owner retired.
2001 262 "Makin IT"
Re: My 262 Build
Finally getting 7 days of sunshine here in western Ky. I am going to try to put her in the water for the first time Friday. TRY
I need to do some more cleaning after work this week and all of my interior is not finished. I was originally told about two weeks. This is going on 4 weeks. I let him know my plans for the weekend and he will try to have them completed this week.
I need to do some more cleaning after work this week and all of my interior is not finished. I was originally told about two weeks. This is going on 4 weeks. I let him know my plans for the weekend and he will try to have them completed this week.
2001 262 "Makin IT"
- thunder550
- Vice Admiral

- Posts: 2246
- Joined: Sun Oct 08, 2017 2:16 pm
- Location: Scottsdale, AZ
- Contact:
Re: My 262 Build
I hope they get it back to you soon. Can't wait to see it!
1995 Cobalt 252 - 502 Mag EFI - Bravo 1 - 21" Revolution 4
Who is online
Users browsing this forum: No registered users and 48 guests
