Help ID this...

[jasondon]

New to me 2012 242WSS
Should have taken a pic, but hoping someone can tell me what this is.
In the back by the engine there is a large white plastic "thing" rectangular in shape. There are slats/holes in it. I have no clue what this could be. It's a fair size.
Could this be for the front where a center bow cushion would sit?

Boat didn't come with a center filler cushion, maybe the p/o forgot to give it to me?

Anyone?

[pcarp]

It may be the “bottom support” of you wet storage area.
It is the storage locker you access from the swim platform on the port side of the boat. Has a mesh lining, the large plastic sheet you are describing sits in there on the bottom to give that area some support and shape.
This is the set up on a standard 242, maybe different on the WS model?

[jasondon]

That sounds exactly right. Strange as it was sitting in the mesh bag on its side, not laying flat. I'll try laying it down flat tomorrow.
Thanks for the tip!

[Driller]

It may be the “bottom support” of you wet storage area.
It is the storage locker you access from the swim platform on the port side of the boat. Has a mesh lining, the large plastic sheet you are describing sits in there on the bottom to give that area some support and shape.
This is the set up on a standard 242, maybe different on the WS model?

+1