Volvo DPS-A delay engaging reverse after long runs

User avatar
BigGib
Captain
Captain
Posts: 268
Joined: Wed Apr 17, 2019 9:11 am
Location: Osage Beach / Wentzville, MO
Contact:

Re: Volvo DPS-A delay engaging reverse after long runs

Post by BigGib »

Does anyone know if there would be a reason they would need to access the top caps during a drive service?
2008 Cobalt 302 5.7GXI's
"Meant to Be"

Wentzville, MO
Lake of the Ozarks
User avatar
cmattj
Admiral
Admiral
Posts: 3963
Joined: Fri Jun 02, 2017 2:52 pm
Location: Stockton, California
Contact:

Re: Volvo DPS-A delay engaging reverse after long runs

Post by cmattj »

BigGib wrote: Thu Jul 11, 2019 1:23 pm Does anyone know if there would be a reason they would need to access the top caps during a drive service?
The dipstick to check the level is in the cap. They can be stripped if the dipstick is over tightened.
They may have attempted a thread repair so it would be removed. As I mentioned it’s a very special process to tighten but not overly tighten. There’s a Volvo torque spec to be followed.
2008 272 , 496 HO fo SHO

California Delta
Table Rock Lake


#FARCON
User avatar
BigGib
Captain
Captain
Posts: 268
Joined: Wed Apr 17, 2019 9:11 am
Location: Osage Beach / Wentzville, MO
Contact:

Re: Volvo DPS-A delay engaging reverse after long runs

Post by BigGib »

I got the boat back and ran it today and no more delay when shifting! They replaced the cone clutches and both drives and they definitely shift much firmer than before. I've always owned Bravo 3's which tend to clunk into gear, this is my first set of VP's. Just want to make sure this is normal?
2008 Cobalt 302 5.7GXI's
"Meant to Be"

Wentzville, MO
Lake of the Ozarks
User avatar
AsLan7
Fleet Admiral
Fleet Admiral
Posts: 11510
Joined: Sat Jul 29, 2017 10:58 am
Location: Erie PA
Has thanked: 1 time
Been thanked: 5 times
Contact:

Re: Volvo DPS-A delay engaging reverse after long runs

Post by AsLan7 »

BigGib wrote: Sat Jul 13, 2019 4:48 pm I got the boat back and ran it today and no more delay when shifting! They replaced the cone clutches and both drives and they definitely shift much firmer than before. I've always owned Bravo 3's which tend to clunk into gear, this is my first set of VP's. Just want to make sure this is normal?
.
I’ve owned both.

Although VP invented the duo prop drive, they definitely shift a little firmer.

Our Merc B3 is so smooth you hardly notice it shifting into forward or reverse.

.
2002 Cobalt 262
&
2005 Cobalt 263
496 MagHO
(sold )
Erie, PA
Currently boatless (for now)
will fly for food

(CChat moderator)
User avatar
cmattj
Admiral
Admiral
Posts: 3963
Joined: Fri Jun 02, 2017 2:52 pm
Location: Stockton, California
Contact:

Re: Volvo DPS-A delay engaging reverse after long runs

Post by cmattj »

Perfectly normal Big.. they will calm but keep in mind there is two boats back there, that they may have slightly different characteristics ( other that the delay you repaired).
Sounds like your in great shape! Glad they gave you a quick turnaround!
2008 272 , 496 HO fo SHO

California Delta
Table Rock Lake


#FARCON
User avatar
BigGib
Captain
Captain
Posts: 268
Joined: Wed Apr 17, 2019 9:11 am
Location: Osage Beach / Wentzville, MO
Contact:

Re: Volvo DPS-A delay engaging reverse after long runs

Post by BigGib »

cmattj wrote: Sun Jul 14, 2019 5:32 pm Perfectly normal Big.. they will calm but keep in mind there is two boats back there, that they may have slightly different characteristics ( other that the delay you repaired).
Sounds like your in great shape! Glad they gave you a quick turnaround!
Thanks for all the help guys! I'm glad it's all fixed, now I can move on to things I want to add to the boat. On board charger and underwater LED's are next 😎
2008 Cobalt 302 5.7GXI's
"Meant to Be"

Wentzville, MO
Lake of the Ozarks
Post Reply

Who is online

Users browsing this forum: No registered users and 23 guests