Windlass for 293
Windlass for 293
First time Cobalt owner and second year with the boat. Our windlass doesn't work. I believe it's a Maxwell brand. Does anyone have intel on a 2000 or so 293 in chasing down problems? No power to it and currently using the manual to crank the anchor up and down. Thanks!
Re: Windlass for 293
Also does anyone know the make and model of the windlass for a 2000 293? Again I believe it's a Maxwell. Boat is in dry rack so I don't have eyes on it. Thanks Forum
-
Holy Smokes
- Captain

- Posts: 383
- Joined: Mon May 07, 2018 2:16 pm
- Location: KS
- Contact:
Re: Windlass for 293
Make sure the main switch is on under the starboard rear seat. Mine was a bear and you had to give it a good whack to get it to push in. After that's on, you'll have power & a light on the helm switch.
Here's the manufacturer spec sheet. Don't recall if the 293 used the RC500 or RC800.
Here's the manufacturer spec sheet. Don't recall if the 293 used the RC500 or RC800.
You do not have the required permissions to view the files attached to this post.
2005 Cobalt 360, 496Mag HO's with Bravo 3X drives
LOTO - Lake of the Ozarks
LOTO - Lake of the Ozarks
Re: Windlass for 293
Holy Smokes, thanks for the note and the spec sheet. I'll give it a try and report back!
Who is online
Users browsing this forum: No registered users and 22 guests
