Page 2 of 2
Re: LED tape lights
Posted: Thu Dec 27, 2018 9:05 am
by akorcovelos
When I did my old boat I had the same issue with the pathetic adhesive on the lights. I used 1/4” wide 3M body trim tape. Has held solid for 4 years, but comes off easily with a heat gun if you want to remove it. It’s what I’ll be using when I get to doing the cobalt.
Re: LED tape lights
Posted: Fri Dec 28, 2018 9:20 am
by thunder550
My replacement 3M tape lights are still stuck well
Re: LED tape lights
Posted: Wed Feb 27, 2019 12:36 pm
by jbrummond
I have stumbled upon this thread as I was considering adding the lights to my courtesy light switch. I was talking with the tech guys here at work and they told me that they have found that rubber cement works the best for getting these to stick. You aren't having to put extra holes in the boat, it fills in cracks and if you ever have to replace it, the rubber cement can be easy to remove. I think I will practice with under cabinet lighting in the kitchen first!
Re: LED tape lights
Posted: Wed Feb 27, 2019 5:21 pm
by AsLan7
jbrummond wrote: Wed Feb 27, 2019 12:36 pm
I have stumbled upon this thread as I was considering adding the lights to my courtesy light switch. I was talking with the tech guys here at work and they told me that they have found that rubber cement works the best for getting these to stick. You aren't having to put extra holes in the boat, it fills in cracks and if you ever have to replace it, the rubber cement can be easy to remove. I think I will practice with under cabinet lighting in the kitchen first!
Thanks for the contribution jbrummond.
....and great to see you come out of the woodwork!
How’d you get into Cobalt boats?
.
Re: LED tape lights
Posted: Fri Mar 01, 2019 12:34 pm
by jbrummond
Thank you, I have been following for a while. I finally felt like I could contribute! I fell in love with Cobalt boats the first time I saw them, 10 years ago on Lake Washington (Seattle area) while cruising around in my 19 foot Maxum bowrider. Drooling, I told my wife, wouldn't it be nice, but no way are we Cobalt people. Last summer I bought my first Cobalt and smiled from ear to ear the 5 hour drive to Spokane and back to pick it up. Happy to say I am finally a Cobalt type person! I am starting to realize that Cobalt type people are regular folks just like me who prefer quality, night and day difference from the Maxum.
We purchased a 2008 220 300hp VP/DP white with red boot stripe last summer that had been babied. The first owner kept it in his garage at his second home (lake house) and the second owner kept it in his garage at his second home (lake house) so it only had 160 hours on it. So now I am drooling for a different reason, to get it out on the water again!
I know you are going to ask for a pic and I am embarrassed I don't have a good one yet, I was too busy having fun with it. I will remedy that this summer. Thank you for reaching out!
Re: LED tape lights
Posted: Fri Mar 01, 2019 12:56 pm
by AsLan7
jbrummond wrote: Fri Mar 01, 2019 12:34 pm
Thank you, I have been following for a while. I finally felt like I could contribute! I fell in love with Cobalt boats the first time I saw them, 10 years ago on Lake Washington (Seattle area) while cruising around in my 19 foot Maxum bowrider. Drooling, I told my wife, wouldn't it be nice, but no way are we Cobalt people. Last summer I bought my first Cobalt and smiled from ear to ear the 5 hour drive to Spokane and back to pick it up. Happy to say I am finally a Cobalt type person! I am starting to realize that Cobalt type people are regular folks just like me who prefer quality, night and day difference from the Maxum.
We purchased a 2008 220 300hp VP/DP white with red boot stripe last summer that had been babied. The first owner kept it in his garage at his second home (lake house) and the second owner kept it in his garage at his second home (lake house) so it only had 160 hours on it. So now I am drooling for a different reason, to get it out on the water again!
I know you are going to ask for a pic and I am embarrassed I don't have a good one yet, I was too busy having fun with it. I will remedy that this summer. Thank you for reaching out!
.
Great story jbr. Yes, pics would be fantastic. Feel free to start a new thread with those when you have time. We
loce them here.
And officially, welcome aboard mate!
.
Re: LED tape lights
Posted: Sun May 05, 2019 3:50 am
by BigGib
https://www.superbrightleds.com/moreinf ... 3046/6648/
The 3m adhesion promoter works incredibly well, wouldn't put a strip up without it!
Re: LED tape lights
Posted: Tue May 07, 2019 7:41 pm
by pcarp
anybody have a link to LED light strips that you are having good luck with?
Re: LED tape lights
Posted: Fri May 10, 2019 9:56 pm
by BigGib
What are you looking for? Single color, white, RGB or RGBW? Best advice is to avoid the cheap junk on Amazon
Re: LED tape lights
Posted: Sat May 11, 2019 1:00 pm
by pcarp
BigGib wrote: Fri May 10, 2019 9:56 pm
What are you looking for? Single color, white, RGB or RGBW? Best advice is to avoid the cheap junk on Amazon
Just looking for some white light, something I can cut to lengths for lighting around the recessed areas on the boat. Like your comment, I don't want to buy some junk. I would like to know recomendations for types (5050 or ?) that is a good spec for this application.
Re: LED tape lights
Posted: Sun May 12, 2019 2:39 pm
by BigGib
pcarp wrote: Sat May 11, 2019 1:00 pm
BigGib wrote: Fri May 10, 2019 9:56 pm
What are you looking for? Single color, white, RGB or RGBW? Best advice is to avoid the cheap junk on Amazon
Just looking for some white light, something I can cut to lengths for lighting around the recessed areas on the boat. Like your comment, I don't want to buy some junk. I would like to know recomendations for types (5050 or ?) that is a good spec for this application.
Chip type is really just the size of the LED chip. 5050 is pretty much the standard these days, as 3528's we're a few years ago, but I would recommend 2835 or 2216 as they are newer and higher efficacy (lumens/watt). How bright are you looking to go? If they are all wired together I would recommend going brighter and getting a dimmer. I work for Superbrightleds but I'm not sure how that works on here with linking to products. I'm not here to sell lights, just help fellow Cobalt enthusiasts out! Either way, just make sure you buy from a reputable retailer and you will get a quality product!
Re: LED tape lights
Posted: Mon May 13, 2019 12:33 pm
by akorcovelos
+1 on the SuperbrightLEDs, used them on my last boat, I'll link them because I had success with them.
https://www.superbrightleds.com/moreinf ... 5050/1710/
Just make sure whatever brand you get they are IP67 or higher.
Re: LED tape lights
Posted: Mon May 13, 2019 6:49 pm
by pcarp
Thank You for the direction, I will head down this path.