Page 2 of 2

Re: How to lower R series Arch

Posted: Tue Apr 20, 2021 8:56 am
by greenhut
Tuscany wrote: Tue Apr 20, 2021 8:24 am
Big Block Power wrote: Wed Apr 14, 2021 6:35 pm Personally I would just back it in the garage and use the auto lowering function 😂😂😂
Also, if you want to bring the engine up to operating temp in 15 seconds, unpin and push down the blue knob to engage the automatic impeller buster in the engine bay.🤣
Ahahah - "automatic impeller buster". Reminds me of a dive trip we were on. At a resort, came across a pole in the ground with a 4 inch nail sticking out of it about 6 feet in the air. We nicknamed it the "Courtesy Brain Impaler"

Re: How to lower R series Arch

Posted: Tue May 04, 2021 8:21 am
by CaptBob
Norris_Boating wrote: Thu Apr 15, 2021 4:55 pm on my R7, yes you can lower it with the Bimini up. once down there is a metal latch near the pivot point that keeps it down. I believe the latch is on the starboard side of the boat.
Correct. There is one on the R5 also. On the starboard side there is a latch. I could not lower the arch enough with the Bimini deployed to reach it. With the Bimini removed/wadded up/stored the arch will lower enough to allow the latch out to hold it down.
more arch latch.jpg
arch latch.jpg

Re: How to lower R series Arch

Posted: Tue May 04, 2021 8:52 am
by AsLan7
.
CaptBob wrote: Tue May 04, 2021 8:21 am
Correct. There is one on the R5 also. On the starboard side there is a latch. I could not lower the arch enough with the Bimini deployed to reach it. With the Bimini removed/wadded up/stored the arch will lower enough to allow the latch out to hold it down.
more arch latch.jpg
arch latch.jpg
.

Thanks for the outstanding documentation with pics CB.


.