Cobaltchat.com

tgrace98 wrote: Mon May 20, 2019 8:55 pm did Charlie Chaplan direct that video? Holy grainy

I think he has a flip phone too

Big Block Power wrote: Mon May 20, 2019 9:04 pm

tgrace98 wrote: Mon May 20, 2019 8:55 pm did Charlie Chaplan direct that video? Holy grainy

I think he has a flip phone too

I’m sure that video went viral.. now just sit back and enjoy the reward$.

Big Block Power wrote: Mon May 20, 2019 9:03 pm

AsLan7 wrote: Mon May 20, 2019 8:55 pm

Big Block Power wrote: Mon May 20, 2019 8:49 pm This is lstgrt1 220 captains call.





.

.
Fixed it for ya’ brother. I just put that string of numbers and letters at the end of your link QPbf1MFM0tw between the YouTube brackets.

.

I tried. Give us a snap shot of what your doing. Maybe I see it now.

I saw what you did. You had more than just that last strings of characters between the brackets.

.

I am more interested in seeing under the hood. I know where I need to drill holes, I just need to know how much offset I need.

Really guys? A flip phone? Apparently BB must have an Android, that doesn’t receive vids very well! I don’t show my face around here for months and this is the treatment I get? I deserve it... haha

BB hope all your tweaks over the winter as well as those very shiny props can make you quicker this year!

LSTGR81 wrote: Fri May 31, 2019 11:12 pm Really guys? A flip phone? Apparently BB must have an Android, that doesn’t receive vids very well! I don’t show my face around here for months and this is the treatment I get? I deserve it... haha

BB hope all your tweaks over the winter as well as those very shiny props can make you quicker this year!

After talking to Corsa they did say merc will work Volvo steering is in the way. So lstgrt1 I have to get some more fuzzy pictures of the inside and what is diff on the merc steering mechanism. I wonder if it's just down lower. Corsa said I can send the exhaust out the side. I days this isn't a Crownline. I'm not drilling holes in the side of my boat. Yecks!!

side exit is lame, you only get to hear 4 cylinders at a time.

I found a 8.1 220 with corsa I got pictures of it. Sent it to corsa and I think they are working on something. I think I can make something work. It's all with time.

Not sure if it will help, but I can upload a picture of my CC setup on my 220.

If I am not mistaken, they are angled in towards the center. I will be out there this week and grab a picture.

That motor will sound ridiculous. To be honest, I am not sure how you waited so long to do it.

I cut holes in a previous boat of mine to install CC. I would recommend buying 2 hole saws. 1 for each side. You want the cleanest possible cut. For me, the second cut was much more difficult. Also, don't use 5200. Corsa should tell you that. I believe they'll recommend 4200.

Thanks. You have a merc. But I'll still take pictures from you. Thanks. lstgrt1 has the 496 merc. He lives 15 minutes from me. I'll get over to his house soon. Merc must put the steering arm down lower than Volvo. That is corsa's hang up on a Volvo. I got a good picture of a 220 Volvo with a 8.1 now too. I have to get out in the boat too see just how tight it's going to be. I need a s pipe to get it to come in. I can get it custom made from corsa or from the guy that did my tower so I'm not to worried about making it happen.
I haven't felt the need for it yet. The Volvo is pretty loud to begin with.

Just get some 90* elbows and stick some stacks straight up through the sun pad.

akorcovelos wrote: Wed Jun 05, 2019 12:41 pm Just get some 90* elbows and stick some stacks straight up through the sun pad.

Yes!! Do this!

Bfun220 wrote: Wed Jun 05, 2019 2:34 pm

akorcovelos wrote: Wed Jun 05, 2019 12:41 pm Just get some 90* elbows and stick some stacks straight up through the sun pad.

Yes!! Do this!

..
Worked for my dad with his Rebel. (just don’t leave the cover off in a rainstorm)

.

What can I say. This forum is the best. Lots of great advise here. TIA

Here you go BBP.

S pipes are definitely needed.