Page 5 of 17

Re: My 262 Build

Posted: Wed Mar 21, 2018 4:38 pm
by juddmyers
20180321_144037.jpg
So anybody know what this panel is for or where it goes. I dont see anything missing a panel.

Also inspected the anchor and rope today. Guessing the anchor is 28lbs and it seems fine. I am not thrilled with the rope but it doesn't seem to be compromised, so we will keep it for now.

Re: My 262 Build

Posted: Wed Mar 21, 2018 4:44 pm
by juddmyers
Also, I pulled out a couple of the carpeted wood cross braces on the horn side today. Going to re glue the carpet to the wood before re installing. Reason for pulling was to see if it might help me get to that dang horn.

Re: My 262 Build

Posted: Wed Mar 21, 2018 4:59 pm
by Cobalt262
juddmyers wrote: Wed Mar 21, 2018 4:38 pm 20180321_144037.jpg

So anybody know what this panel is for or where it goes. I dont see anything missing a panel.

Also inspected the anchor and rope today. Guessing the anchor is 28lbs and it seems fine. I am not thrilled with the rope but it doesn't seem to be compromised, so we will keep it for now.
Hey juddmyers, thanks for the stats on your project. I might be doing mine soon because of your inspiration.

That white board fits in back starboard side storage where the ski pilot is. I don't know its use.

Jeff

Re: My 262 Build

Posted: Wed Mar 21, 2018 5:18 pm
by juddmyers
Cobalt262 wrote: Wed Mar 21, 2018 4:59 pm
juddmyers wrote: Wed Mar 21, 2018 4:38 pm 20180321_144037.jpg

So anybody know what this panel is for or where it goes. I dont see anything missing a panel.

Also inspected the anchor and rope today. Guessing the anchor is 28lbs and it seems fine. I am not thrilled with the rope but it doesn't seem to be compromised, so we will keep it for now.
Hey juddmyers, thanks for the stats on your project. I might be doing mine soon because of your inspiration.

That white board fits in back starboard side storage where the ski pilot is. I don't know its use.

Jeff

Hmmm.. that is interesting. Like you, not sure what purpose it would serve.

Re: My 262 Build

Posted: Wed Mar 21, 2018 6:23 pm
by AsLan7
juddmyers wrote: Wed Mar 21, 2018 5:18 pm
Cobalt262 wrote: Wed Mar 21, 2018 4:59 pm
juddmyers wrote: Wed Mar 21, 2018 4:38 pm 20180321_144037.jpg

So anybody know what this panel is for or where it goes. I dont see anything missing a panel.

Also inspected the anchor and rope today. Guessing the anchor is 28lbs and it seems fine. I am not thrilled with the rope but it doesn't seem to be compromised, so we will keep it for now.
Hey juddmyers, thanks for the stats on your project. I might be doing mine soon because of your inspiration.

That white board fits in back starboard side storage where the ski pilot is. I don't know its use.

Jeff

Hmmm.. that is interesting. Like you, not sure what purpose it would serve.
.
Like mentioned above, that board allowed the user to have a sort of shelf option under the starboard swim pad hatch. It separated that storage compartment into a "top" and "bottom" option.

Not very useful really so Cobalt only offered this on the 2000 and 2001 260 series. They eliminated it starting in 2002.

.

Re: My 262 Build

Posted: Thu Mar 22, 2018 6:33 am
by Cobalt262
My first thought was a cutting board, because I have a cutting board made of similar material, but Cobalt owners are not buying a fishing boat. I think AsLan7''s answer makes the most sense.

Thanks again for the pics juddmyers. Please keep them coming.

Re: My 262 Build

Posted: Tue Apr 03, 2018 9:15 am
by juddmyers
Just an update. Upholstery is still out. They have had it for a little over 2 weeks now. I was originally told that they like to turn around in about 2 weeks, so I am hopeful that it will be back soon. I guess it isn't a huge rush as it has done nothing but rain here in western Kentucky. Going to stop raining after today for this week but temps will be in the 50s.

Did check the oil via the dip stick a few days ago and it looks brand new. Betting they put new in when they winterized it. Looks super clean. So now I am debating on whether or not I should get it changed for the season or wait.

Still waiting on wet sounds to ship their stereo remote, so that I can get it installed on the swim platform also.

Re: My 262 Build

Posted: Tue Apr 03, 2018 5:18 pm
by Driller
juddmyers wrote: Wed Mar 21, 2018 4:38 pm
So anybody know what this panel is for or where it goes. I dont see anything missing a panel.
I've got a similar one on my boat. In the wet storage it has netting, mine sets in the bottom of the netting to make a hard bottom.

Re: My 262 Build

Posted: Fri Apr 06, 2018 6:20 am
by thunder550
juddmyers wrote: Tue Apr 03, 2018 9:15 am Did check the oil via the dip stick a few days ago and it looks brand new. Betting they put new in when they winterized it. Looks super clean. So now I am debating on whether or not I should get it changed for the season or wait.
Did they give you any service records where you can validate? Does it smell like fresh oil? If they stayed up on maintenance, it's usually standard practice to change fluids before putting into storage so any water that might be in the oil won't sit against the metal parts all winter long.

Re: My 262 Build

Posted: Fri Apr 06, 2018 12:53 pm
by Big Block Power
I'm sure it's new oil like the t
Terminator said. Most places change oil when they winterize it. I like using BG Moa additive as it sticks to the the metal pieces and protects it from premature wear.

Re: My 262 Build

Posted: Fri Apr 06, 2018 4:06 pm
by Driller
juddmyers wrote: Thu Mar 08, 2018 9:28 am With the radio install, I did also have him install a wet sounds rgb controller to control the light rings around my speakers and the lights in the speakers themselves. This is temporary for me, I think. My wet sounds radio is capable of doing that with a $500 module. I didn't want to spend the 500 at the time so I had him add the $100 stand alone controller.
I went with the standalone wet sounds controller, runs my speaker rings, gunwale, and underwater lights. As soon as I figure out how to convert my courtesy lights I'm hook them up also. You see it mounted to right of my stereo remote.
.

Re: My 262 Build

Posted: Sun Apr 08, 2018 8:24 am
by juddmyers
Driller wrote: Fri Apr 06, 2018 4:06 pm
juddmyers wrote: Thu Mar 08, 2018 9:28 am With the radio install, I did also have him install a wet sounds rgb controller to control the light rings around my speakers and the lights in the speakers themselves. This is temporary for me, I think. My wet sounds radio is capable of doing that with a $500 module. I didn't want to spend the 500 at the time so I had him add the $100 stand alone controller.
I went with the standalone wet sounds controller, runs my speaker rings, gunwale, and underwater lights. As soon as I figure out how to convert my courtesy lights I'm hook them up also. You see it mounted to right of my stereo remote.

Yea, I can hide that controller and my wet sounds head unit will then be the interface for my lights. I'll eventually do that.

Re: My 262 Build

Posted: Sun Apr 08, 2018 8:25 am
by juddmyers
Yes, oil looks and smells fine. I can not get service records, the place I purchased from was going out of business. Owner retired.

Re: My 262 Build

Posted: Sun Apr 08, 2018 8:27 am
by juddmyers
Finally getting 7 days of sunshine here in western Ky. I am going to try to put her in the water for the first time Friday. TRY

I need to do some more cleaning after work this week and all of my interior is not finished. I was originally told about two weeks. This is going on 4 weeks. I let him know my plans for the weekend and he will try to have them completed this week.

Re: My 262 Build

Posted: Sun Apr 08, 2018 8:40 am
by thunder550
I hope they get it back to you soon. Can't wait to see it!