Page 1 of 1
1999 216 - Electronics Install
Posted: Wed Apr 25, 2018 2:09 pm
by Cobro
I am considering installing some electronics for navigation and sonar to mark debris but i do not want to mess up my dash permanently. Any suggestions on where i can find some good pictures and or videos on how to install and on what gear to consider?
Re: 1999 216 - Electronics Install
Posted: Wed Apr 25, 2018 6:02 pm
by Driller
Re: 1999 216 - Electronics Install
Posted: Wed Apr 25, 2018 6:44 pm
by jhnmdahl
Cobro, I was having difficulty with a 210 as well, but found Ram mounts over the winter and will give it another shot once the 210 comes out of hibernation - see
https://www.rammount.com/activity/boat-mounts
There's no way I can fit my chartplotter (echomap 70s) in the dash, so I'll need something like this to position it between the dash and windscreen.
John
Re: 1999 216 - Electronics Install
Posted: Thu Apr 26, 2018 8:01 pm
by AsLan7
Cobro wrote: Wed Apr 25, 2018 2:09 pm
I am considering installing some electronics for navigation and sonar to mark debris but i do not want to mess up my dash permanently. Any suggestions on where i can find some good pictures and or videos on how to install and on what gear to consider?
Hey, just noticed your post. Driller may be able to chime in with your question.
.
...and welcome to the CChat forum Cobro!
.