Cobaltchat.com

Ok it's been a little struggle but I got the mefi-4 program working on my laptop. Im sure Mr. Nauti could have did it in his sleep.
Thanks to Slideruler selling me his disc. This May come in handy when buying boats.
So my engine has 259 hours on it and the hour meter shows 272.
Other data is cool like what rpm she normally runs at.

Nice buddy! Is there a gauge screen for voltage? Blade angle.? I see some great info. 255 starts with no malfunctions.

It’s also shows your horoscope sign is Leo, and you like pizza.. Amazing!

cmattj wrote: Sat Aug 25, 2018 7:41 pm Nice buddy! Is there a gauge screen for voltage? Blade angle.? I see some great info. 255 starts with no malfunctions.

It’s also shows your horoscope sign is Leo, and you like pizza.. Amazing!

Yes throttle was at 0. Yes Leo yes pizza yes no malfunctions. I wonder what date that counter started at? Yes the dashboard has about 8 diff things you can watch. You can switch it up out of prob a 100 parameters.
I'll disconnect the Hobbs to match up with it.

Very cool BBp. I wonder why it's showing 8.6 minutes above 5000 rpm? Seems a little excessive, no?

AsLan7 wrote: Sat Aug 25, 2018 10:11 pm Very cool BBp. I wonder why it's showing 8.6 minutes above 5000 rpm? Seems a little excessive, no?

Na it's trying to get to 5200 rpms? I guess it didn't hit fuel cut off yet?

Pretty cool info. How much does a kit like this cost?

Pretty cool, I need to look into this. I got a report from the marina I bought mine at that shows all the MEFI 1 info, and like you the ECM showed about 80 hours less than the hour meter.

smokymance wrote: Wed Oct 24, 2018 10:00 pm Pretty cool info. How much does a kit like this cost?

http://mefiburn.com/products/injfuse.asp

Check them out.

Well just fired her up for the first time with the new ecu tune. Can't wait to dump it in the water in June
https://youtu.be/QGOH_7LhAxI

Sounds mean! Love the lope, hope mine sounds that good!

Yea she always sounded like that. And some fool didn't order this boat with captains call. Wth.

Big Block Power wrote: Thu May 02, 2019 8:12 pm Yea she always sounded like that. And some fool didn't order this boat with captains call. Wth.

Now you have to winterize it again before summer.

Big Block Power wrote: Thu May 02, 2019 8:12 pm Yea she always sounded like that. And some fool didn't order this boat with captains call. Wth.

Time to breakout the hole saw!

Does one have to replace the stock ECM in order to use this scan tool?

G

Nope I used it on my stock one. But I think I might add a a fox Marine nema2000 Bluetooth unit instead. Plus if I add a chart plotter then I can send engine data to it.
The advantage I have with this software is its the same company that did the ecu upgrade so if I have issues with it they can see what is doing.
http://fox-marine.com/index.php?route=p ... ry&path=81