Page 1 of 1
2008 Cobalt 282 aft walk-thru filler cushion set
Posted: Wed Oct 17, 2018 2:00 pm
by Chiliman
I recently bought a 2008 Cobalt 282, and am looking for an aft walk-thru cushion set (seat and tanning deck pad). Cobalt doesn't offer replacements after 7 years, and I know I can have one made from a local upholstery shop. Before going down that path, wanted to check if any cobalt owner know where I can get one without having it made. Thanks!
Re: 2008 Cobalt 282 aft walk-thru filler cushion set
Posted: Wed Oct 17, 2018 2:27 pm
by SAB220
Suggest you do a site search...noticed this is a popular question
Re: 2008 Cobalt 282 aft walk-thru filler cushion set
Posted: Wed Oct 17, 2018 2:31 pm
by cmattj
Tricky as the 282 and 262/263 are different. But there may be a For sale owner that may part with them.
You should visit our new members section and post some pics and tell us more about your 282!
Welcome going forward.!
Re: 2008 Cobalt 282 aft walk-thru filler cushion set
Posted: Wed Oct 17, 2018 2:40 pm
by Chiliman
Just bought it last week and had to immediately winterize it. Didn't get very good pics, but will in the spring and post then. Also did a site search and got the name and number of a guy who used to work at Cobalt. Will give it a shot. Thanks!
Re: 2008 Cobalt 282 aft walk-thru filler cushion set
Posted: Sat Oct 20, 2018 7:56 pm
by AsLan7
Chiliman wrote: Wed Oct 17, 2018 2:40 pm
Just bought it last week and had to immediately winterize it. Didn't get very good pics, but will in the spring and post then. Also did a site search and got the name and number of a guy who used to work at Cobalt. Will give it a shot. Thanks!
Hey, Chiliman, welcome to the CChat forum. So glad you found us my friend.
Filler cushions are a tough bird to find. You can email folks on boat trader (like I did) asking to buy their cushions. (If you see the button snaps in their pictures where the fillers go, then they most likely have them.)
Or you can have someone who has a 282 on the forum here take theirs to a furniture upholsterer (or something similar) to have them fabricated. YTmsn was starting to get that done for me before I found option 3.....a used parts boat that was being piecemeal-ed out. What are the odds. It had brand new transom filler cushions still in the plastic bags!
We will keep an eye out for ya'. BigBlockPower is a master at finding hard to find Cobalt parts. You never know...it may happen.
In the meantime, post some pics when you get her out of storage.....and Welcome Aboard Mate!
.