1994 Cobalt 223 Cuddy parts needed
Posted: Fri Nov 16, 2018 9:44 am
Hi, I am new to the forum and could use some help. I just purchased a winter boat project (1994 Cobalt 223) that runs really well but needs some love.
1) I am looking for a replacement in-dash Lowrance depth finder, really would like to find a working unit so I don't have to modify the dash.
2) The cuddy entrance cover hatch has a crack in the plexiglass, I could make one out of aluminum but a replacement cover would be much better.
3) Looking for advice on a kicker motor bracket that can mount on the stock swim platform.
4) Lastly but most important is a replacement cover for the front cuddy hatch which has a large crack, if the boat is in the rain the hatch is leaking water into the cuddy. My concern with an aftermarket hatch is it will require modifications (cutting) to the fiberglass and interior headliner.
Any other suggestions for improvement to my old boat are welcomed.
Mercruiser 7.4 wiht a Bravo 1 with 400 hours.
Thanks for the help,
John
1) I am looking for a replacement in-dash Lowrance depth finder, really would like to find a working unit so I don't have to modify the dash.
2) The cuddy entrance cover hatch has a crack in the plexiglass, I could make one out of aluminum but a replacement cover would be much better.
3) Looking for advice on a kicker motor bracket that can mount on the stock swim platform.
4) Lastly but most important is a replacement cover for the front cuddy hatch which has a large crack, if the boat is in the rain the hatch is leaking water into the cuddy. My concern with an aftermarket hatch is it will require modifications (cutting) to the fiberglass and interior headliner.
Any other suggestions for improvement to my old boat are welcomed.
Mercruiser 7.4 wiht a Bravo 1 with 400 hours.
Thanks for the help,
John
