Page 1 of 1

Timed Light Off Relay

Posted: Mon Aug 26, 2019 11:04 am
by greenhut
Thinking about installing a couple of the following devices to automatically turn off interior lights, underwater lights after a certain amount of time to avoid draining 2nd battery. Anyone tried similar?

http://timers.shop/12V-10-Amp-Timer-POS ... _p_13.html

Re: Timed Light Off Relay

Posted: Mon Aug 26, 2019 2:08 pm
by cmattj
Great idea . But the amperage of only 10 maybe the weak point. Sliderule May chime in as he uses a system for mooring with underwater lights.

Re: Timed Light Off Relay

Posted: Mon Aug 26, 2019 8:55 pm
by Driller
greenhut wrote: Mon Aug 26, 2019 11:04 am Thinking about installing a couple of the following devices to automatically turn off interior lights, underwater lights after a certain amount of time to avoid draining 2nd battery. Anyone tried similar?

http://timers.shop/12V-10-Amp-Timer-POS ... _p_13.html
Read this thread:
viewtopic.php?f=21&t=1493

Re: Timed Light Off Relay

Posted: Tue Aug 27, 2019 4:09 pm
by greenhut
Thanks Driller - reached out to SRR.

Re: Timed Light Off Relay

Posted: Wed Sep 04, 2019 4:16 pm
by greenhut
SRR indeed used the units from timers.shop for his setup. I ordered one, wired it up, programmed it and installed yesterday:

The Unit:
img_7954.jpg
Wired up for my use:
IMG_0992.JPEG
Programming jig wired up:
IMG_0993.JPEG

Re: Timed Light Off Relay

Posted: Wed Sep 04, 2019 4:23 pm
by greenhut
Temporarily installed on my LED accent lighting to test:
IMG_0995.JPEG

Installed to UW Lights in engine box:
IMG_0983.JPEG
This is what I bought:
http://timers.shop/6V-28V-10-Amp-Timer- ... _p_13.html

There is an excellent manual, videos, cookbooks, etc. Programming wasnt difficult, but having said this, I'm in the software development business. You program with clicks on the programming jig ($5):

http://timers.shop/Timer-configuration- ... _p_18.html

Its really not that hard for basic setups like mine.

I put Deutch connectors on the power in (Red/Black), power out (Yellow/Black) to make installation really simple. The Green/White wires are used by the programming jig, and the blue wire is used for triggering more complex timer scenarios. While my installation is simple it also doesnt allow me to do what SRR setup. In SRR's config, the timer is always powered, and the switch on the dash is wired to the trigger input.

Right now, I just have it set to automatically turn off after 40 minutes.

Great little device with tons of useful applications!

Re: Timed Light Off Relay

Posted: Wed Sep 04, 2019 4:44 pm
by Ytmsn
Nice job!

Re: Timed Light Off Relay

Posted: Wed Sep 04, 2019 7:23 pm
by Big Block Power
What did he say? His underwater light is turned on by the platform switch oh my I'm lost 😂😂😂💡