Page 1 of 1
Volvo 380-c-b 2013 Sea Water pump leaking
Posted: Sat Sep 21, 2019 5:56 pm
by Howl Yes 242
I just noticed a slight leak from what I think is the pump body. Is there a common reason for this to start leaking? It does not seem like it is the cover housing the impeller. I would hate to replace the pump housing when I can go a less costly route. I can do the work myself, I'm comfortable doing it. It seems like the water is dripping slightly from the machined slot at the bottom of the pump body. Any ideas are appreciated.
Re: Volvo 380-c-b 2013 Sea Water pump leaking
Posted: Sun Sep 22, 2019 7:10 pm
by Driller
Mine did the same at the start of the season. It seems there is a seal on the shaft which drives the impeller thru the pump housing. Mine was a fairly quick drip and only when the engine was up to operating temp. I think they replaced the entire housing to solve the problem, but not sure. It wasn't a cheap fix for me. If I recall correctly around $500 including labor.
Re: Volvo 380-c-b 2013 Sea Water pump leaking
Posted: Mon Sep 23, 2019 12:20 pm
by Howl Yes 242
Driller,
That sounds just like mine. I just ordered a new pump yesterday for $385. It looks like a straight-forward easy change.
Re: Volvo 380-c-b 2013 Sea Water pump leaking
Posted: Mon Sep 23, 2019 4:05 pm
by rrfisher
Re: Volvo 380-c-b 2013 Sea Water pump leaking
Posted: Mon Sep 23, 2019 9:28 pm
by Howl Yes 242
Dang... I would have tried that if I had seen it first. Thanks for the link.
Re: Volvo 380-c-b 2013 Sea Water pump leaking
Posted: Mon Sep 30, 2019 11:38 am
by Howl Yes 242
I replaced it this past weekend. It was simple and straight forward. One word of caution, the new version is a bit longer of a body than the original and it gave me pause that the steel arm bracket was going to be long enough, but it was just fine.
Re: Volvo 380-c-b 2013 Sea Water pump leaking
Posted: Mon Sep 30, 2019 12:50 pm
by Big Block Power
Howl Yes 242 wrote: Mon Sep 30, 2019 11:38 am
I replaced it this past weekend. It was simple and straight forward. One word of caution, the new version is a bit longer of a body than the original and it gave me pause that the steel arm bracket was going to be long enough, but it was just fine.
Cool thanks for the Feedback!