Garmin/simrad/lowrance vs OEM depth gauge?
Posted: Wed Apr 01, 2020 1:39 pm
Anyone else ditch their factory depth/temp gauges and install an aftermarket fish finder chartplotter? Thoughts on flush mounting one in the dash?
Cobaltchat.com
Cobalt Boats Forum
https://www.cobaltchat.com/
Garmin/simrad/lowrance vs OEM depth gauge?
Page 1 of 2
Re: Garmin/simrad/lowrance vs OEM depth gauge?
Posted: Wed Apr 01, 2020 1:46 pm
What year model do you have? Mine would only fit a 5" screen and I'd need to relocate the rheostat for the dash lights to make it work. Plenty of room behind the panel though. Not a very good spot in terms of looking at it while under way either.
Re: Garmin/simrad/lowrance vs OEM depth gauge?
Posted: Wed Apr 01, 2020 2:11 pm
I'm in a 1999 232. Thinking about the Garmin striker4. Nothing too fancy. I just need depth really since we just go to the local lakes, and it would be nice to have a fish finder for when the kids want to fish. So it's a small unit. I was thinking about putting it to the right of the steering wheel, but I would have to move or reposition the switch panel that is there now. Both my factory temp sensor and depth gauge are not working correctly. And this seems to be another option instead of putting new temp/depth gauges in. Here's the current dash:
Re: Garmin/simrad/lowrance vs OEM depth gauge?
Posted: Thu Apr 02, 2020 12:56 am
Yeah same place I looked at, though you have more to relocate than I would. Still, try sitting in the helm and looking at where that would be when you’re driving, it’s not very useful that low.
Re: Garmin/simrad/lowrance vs OEM depth gauge?
Posted: Thu Apr 02, 2020 8:41 am
Good point. Going to play with it this weekend hopefully and see what works.
Re: Garmin/simrad/lowrance vs OEM depth gauge?
Posted: Mon Apr 06, 2020 1:14 pm
Starting surgery's. 
Re: Garmin/simrad/lowrance vs OEM depth gauge?
Posted: Mon Apr 06, 2020 2:31 pm
So fill us in on What your doing here?
Re: Garmin/simrad/lowrance vs OEM depth gauge?
Posted: Mon Apr 06, 2020 2:36 pm
I took both the left and right switch panels out, the ones that are to the left and right of the steering wheel. I'm attempting to move all three gauges and also the four switches/indicatorlights/breakers from the left panel to the right panel. Then the only thing that will remain on the left panel is the ignition key/barrel and breaker. Then I'll flush mount the Garmin on the left panel. If I can pull it off, all the switches and gauges will end up on the right panel, and only the Garmin & ignition will be on the left panel. I'm keeping the stock metal panels underneath and cutting the holes I need, and using Lexan as the top layer as the finishing touch. I'm trying to figure out how to finish the Lexan, maybe back-painted, maybe top painted, maybe clear? not sure. And also trying to figure out how to print new labels for each of the switches since the stock ones were just printed onto the factory metal panels.
Re: Garmin/simrad/lowrance vs OEM depth gauge?
Posted: Mon Apr 06, 2020 4:33 pm
Cool. Keep it going. Can't wait to see how this goes.baktasht wrote: Mon Apr 06, 2020 2:36 pmI took both the left and right switch panels out, the ones that are to the left and right of the steering wheel. I'm attempting to move all three gauges and also the four switches/indicatorlights/breakers from the left panel to the right panel. Then the only thing that will remain on the left panel is the ignition key/barrel and breaker. Then I'll flush mount the Garmin on the left panel. If I can pull it off, all the switches and gauges will end up on the right panel, and only the Garmin & ignition will be on the left panel. I'm keeping the stock metal panels underneath and cutting the holes I need, and using Lexan as the top layer as the finishing touch. I'm trying to figure out how to finish the Lexan, maybe back-painted, maybe top painted, maybe clear? not sure. And also trying to figure out how to print new labels for each of the switches since the stock ones were just printed onto the factory metal panels.
Re: Garmin/simrad/lowrance vs OEM depth gauge?
Posted: Mon Apr 06, 2020 4:54 pm
subscribed!
Re: Garmin/simrad/lowrance vs OEM depth gauge?
Posted: Mon Apr 06, 2020 5:50 pm
I need y'all's opinion. Which look for the panel?
Re: Garmin/simrad/lowrance vs OEM depth gauge?
Posted: Mon Apr 06, 2020 5:58 pm
Be careful the more shiny it is the harder it will be to see in the sun. My 2 cents. I'm going broke today.
Re: Garmin/simrad/lowrance vs OEM depth gauge?
Posted: Mon Apr 06, 2020 6:08 pm
Also, which color and style print for the labels?
Re: Garmin/simrad/lowrance vs OEM depth gauge?
Posted: Mon Apr 06, 2020 6:38 pm
Black in a cobalt font.
Re: Garmin/simrad/lowrance vs OEM depth gauge?
Posted: Mon Apr 06, 2020 6:56 pm
Here's a photo next to the stock panels for don't comparison