ilushka85 wrote: Sat May 30, 2020 9:27 am
Can you shoot a link to the tower speakers you recommended ? How hard to install and wire to existing system?
She is powered by Volvo 430. Wish she had a bow thruster but apparently dealers have not been ordering thrusters.
.
Yes, that A29 will be quite a handful docking in a crosswind with no bow thruster and a single engine.

Be sure to give us a Captain's report.
Not sure what your budget is for tower speakers. I'm a big fan of JL Audio
inside the boat for it's accuracy, looks (just recently), reliability, reputation, power, and functionality. For
outside boat listening it is very hard to beat horn driven tweeters & 10" woofers with lots of power behind them. Wet Sounds makes a killer product for this. Their REV10's look great and project so well...both bass and treble. We just added them to our boat and posted a quick demo
here.
Again, knowing your budget and how you want to use them will allow folks to make recommendations. I'm guessing with an A29 new boat purchase in Miami you are leaning toward higher end. Top of the line tower speakers with the addition of top of the line power and wiring will run close to $4,000. We used a
Wet Sounds Sinister SDX4 4 channel amp to mono bridge our tower speakers giving them almost 700 Watts each. The
Wet Sounds REV10's that we used were ordered with stainless swivel clamps and covers. The white works well for our stainless tower. Also consider black. You'll see some boats with 4 tower speakers but it is not necessary with the setup above. Plus you will have more headroom. IMHO, for your size boat, I would not recommend any 8" tower speakers as they will look small (unless you are doing multiple). If you do 8" tower speakers I'd consider
Rockford Fosgate horns or
JL Audio 8.8's. If your tower folds then you may want smaller.
The links above are for Creative Audio (except RF). James Taylor (JT) has worked with a number of folks here and can help with pricing as well. Ask for him. The dude knows his stuff.
Also consider
Crutchfield. Fantastic service, amazing website, and they've been around forever.
Most folks will recommend two amps....one for inside boat audio that also powers your sub and another amp for outside boat (tower or transom) audio.
Installation to the towers required fishing wire through our Samson tower and drilling thru the thick stainless with carbide bits. Yours might already be prewired. Honestly I'd recommend an installer as there are some other install items to consider for some of these prewired Cobalts. We upgraded our power supply wires to 0 gauge and added a 135 amp breaker for the install.
.
1.jpg
.
.
2.jpg
.
.
Finally, if you do much night boating, consider the LED rings with the tower speakers. They look cool. BigBlockPower added them to his Wet Sounds shown
here.
Hope this helps. Again, great to have you on the forum. I believe you may be the first on the site with an A29 in your/our arsenal.
.