Page 1 of 1
PTA Calibration Settings
Posted: Sat Jul 16, 2022 9:30 am
by Neil1019
Would appreciate if anyone with a R5 (post 2017 model) could share the PTA )power trim assist) calibration settings.
To view this - on the square display by the side of the throttle:
In the Settings menu, scroll to select PTA Calibration.
Scroll to highlight PTA Pos 1, then press OK.
Please let me know RPM and associated Trim Angle for each of the 5 positions.
Thank you very much.
Re: PTA Calibration Settings
Posted: Sat Jul 16, 2022 11:41 am
by AsLan7
.
So glad you found us Neil1019.
Can't help you with your settings but someone on the forum should be able to provide that information.
Any pics of your R5?
And welcome aboard mate!
.
Re: PTA Calibration Settings
Posted: Tue Jul 19, 2022 11:14 am
by Krob1114
Neil1019 wrote: Sat Jul 16, 2022 9:30 am
Would appreciate if anyone with a R5 (post 2017 model) could share the PTA )power trim assist) calibration settings.
To view this - on the square display by the side of the throttle:
In the Settings menu, scroll to select PTA Calibration.
Scroll to highlight PTA Pos 1, then press OK.
Please let me know RPM and associated Trim Angle for each of the 5 positions.
Thank you very much.
We have the power trim assist. I don't know the factory settings, but we quickly discovered it wasn't for us on our lake.
The trim went up with the RPM's, so if there were any waves, all we did was porpoise more. I went back to manual, and wife doesn't complain.