Page 1 of 1
LoPro Bilge Pump R7
Posted: Sat Jul 30, 2022 8:42 am
by higginspa1371
Replaced pump and auto will not come on even with pump fully submerged. Manuel button at helm works. Calls for a 7.5 in line fuse to the battery, checked and it has a 1 amp fuse at the battery. Could this be the issue. Dealer tech said he would leave the 1 amp fuse because that is probably how it came from the factory. If any one has a chance can you check what inline fuse u have at the battery. 380 vp but i assume all the r series use the same rule lo pro pump.
Re: LoPro Bilge Pump R7
Posted: Fri Oct 28, 2022 5:28 pm
by Titaniumboy
Did you ever get this resolved? Was the 1 Amp fuse blown?
The 1 Amp fuse does not sound correct. The site below says that the Rule LoPro 900S draws 4 Amps. Elsewhere I have seen that the Rule LoPro is recommended to have a 7.5 Amp fuse.
https://www.go2marine.com/rule-lopro-au ... ph-12-volt
31CD4FAA-FBFA-4815-AA2C-7AB953E9CEA2.png
Re: LoPro Bilge Pump R7
Posted: Sat Nov 26, 2022 8:40 pm
by higginspa1371
7.5 fuse is in fuse box in front storage where amp is. Second pump failed and now fuse keeps tripping. Hope dealer can figure it out. I am assuming its a wiring issue.