Page 1 of 1
2014 336 windlass fuse
Posted: Sat Sep 03, 2022 5:55 pm
by Ajb014
Good afternoon
Happy Labor Day weekend. I have a 2014 336 and the windlass stopped working and isn’t getting power. Manual shows the fuse by the battery switches but I’m not seeing it
Re: 2014 336 windlass fuse
Posted: Sat Sep 03, 2022 7:18 pm
by Titaniumboy
I found a small fuse hiding behind my battery switch the other day. Maybe they did the same thing on your boat with the windlass?
Maybe you can post pictures of the battery switch area?
Re: 2014 336 windlass fuse
Posted: Sat Sep 03, 2022 9:53 pm
by AsLan7
.
Hey Ajb…..so glad you found us.
I’m curious if you checked the circuit breakers?
Any pics?
And welcome aboard mate.
.
Re: 2014 336 windlass fuse
Posted: Sat Sep 03, 2022 10:02 pm
by Ajb014
Thanks for the reply’s chaps. I will take pictures. I will get some pictures in the morning. Thanks again
Re: 2014 336 windlass fuse
Posted: Sun Sep 04, 2022 9:39 am
by Ajb014
Photo one is under the helm, photo two is back by the battery switches.
Re: 2014 336 windlass fuse
Posted: Sun Sep 04, 2022 11:26 pm
by Titaniumboy
Thanks for the pictures. It isn’t clear in your first picture what the second from left breaker, and the two rightmost breakers are labeled.
I would call Cobalt and see if they are still willing to send out electrical drawings. Even with drawings you still may very well be going “panel diving” to troubleshoot the issue.
Re: 2014 336 windlass fuse
Posted: Mon Sep 05, 2022 6:51 am
by marz989
First picture, bottom right, the breaker labeled Maxwell. I'm guessing you have a Maxwell windlass. The breaker looks to be tripped. That little black lever needs to be pushed up to reset.
Re: 2014 336 windlass fuse
Posted: Mon Sep 12, 2022 7:36 pm
by kep5niner
I concur with the above.
Re: 2014 336 windlass fuse
Posted: Mon Sep 12, 2022 9:05 pm
by Titaniumboy
marz989 wrote: Mon Sep 05, 2022 6:51 am
First picture, bottom right, the breaker labeled Maxwell. I'm guessing you have a Maxwell windlass. The breaker looks to be tripped. That little black lever needs to be pushed up to reset.
Nice catch!