Stalling

[kylesouth17]

Just got a 2000 cobalt 206 with the volvo 5.0. motor starts up and runs great. the issue i am having is that when im running and hit a decent size wake, the motor shuts off. radio shuts off as well. any idea what could be causing this? thanks in advance.

[AsLan7]

Just got a 2000 cobalt 206 with the volvo 5.0. motor starts up and runs great. the issue i am having is that when im running and hit a decent size wake, the motor shuts off. radio shuts off as well. any idea what could be causing this? thanks in advance.

.
Hey KS17, welcome to the CobaltChat forum. So glad you found us!

Sorry to hear about your electrical woes with the engine and radio.

My first thought is a loose wire on the ignition switch. If you disconnect a wire at the switch, your engine and all electrics will turn off. You may be simulating that by hitting a decent size wake or any waves which will momentarily disconnect the current running from one of those wires on the back of the ignition switch if it is loose.

Look under the dash and see if one of the wires to that switch is loose. Should be an easy fix by tightening one of the screws. You may have to take that switch out if you cannot see it from under the dash.

Any pics?

Again, welcome aboard mate!

.

[Big Block Power]

Welcome. I take it she fires right back up. Check your wire on the back of the alt too they like to loosen up. You have a 50 amp breaker back by the engine check those wires as well. Yes like A7 said check your wires going to the switch behind the helm. Also check you kill switches.

[kylesouth17]

Yeah starts right back up. I usually wait a couple minutes but have no issue getting back going. Ill check all these things tonight. thanks for the help

[AsLan7]

.
Alternator wire could be another culprit (like bbp mentioned). Basically looking for a chafed or loose wire somewhere since the radio is cutting out at the same time.

.

[Big Block Power]

.
Alternator wire could be another culprit (like bbp mentioned). Basically looking for a chafed or loose wire somewhere since the radio is cutting out at the same time.

.

Yea if everything is going dead its a main feed.

[kylesouth17]

Went to check it out after work. Found a loose cable behind the ignition that I tightened. Hopefully that will fix it. Won’t know until I hit the lake. I checked everything else and it all seemed to be fine. I’ll let y’all know. Thanks for the help!

[AsLan7]

Went to check it out after work. Found a loose cable behind the ignition that I tightened. Hopefully that will fix it. Won’t know until I hit the lake. I checked everything else and it all seemed to be fine. I’ll let y’all know. Thanks for the help!

.
Glad to hear ks17. Snap a pic from the lake.

.

[Big Block Power]

Very cool. Cross our fingers for ya.
You could start her up and drive her around the block. Lol
I didn't say all advise was good around here.

[kylesouth17]

4D4E8C4E-0241-4100-A845-DC75D3ED1807.jpeg

[Big Block Power]

Nice picture ks17!

[AsLan7]

.
That’s all we ask for ks17. Thanks for the pic brutha.

.

[Islander208]

Great picture; hope that fixed your problem

[ajcampen]

Love this group. Empowering internet / boat fanatics everywhere. Nice work everyone and glad you found the loose wire

[kylesouth17]

Just to do an update, took the boat out this weekend, hit large wakes on purpose to try to kill the motor and it never died. Looks like tightening the ignition wires worked. thanks again