R3 - Vibration

(R3-R8, R30, R35)
BobRae99
Vice Admiral
Vice Admiral
Posts: 1161
Joined: Mon Jan 22, 2018 10:16 am
Location: Canada
Contact:

R3 - Vibration

Post by BobRae99 »

Hi All,

End of the season for us and my boat was hauled out on Friday. I had been experiencing a vibration which is felt through the seat and is most apparent at around 3,000 RPM. I didn't try running the engine up to 3,000 in neutral before I hauled it out, but the dealer (who hauled the boat out for me) said that often vibration can result from a nicked or otherwise damaged prop.

When the boat was hauled out, I noticed a bit of scratching on the end of one blade on the rear prop and a very slight dent (rear prop - blade in the 9:00 position). Dealer isn't sure if that would cause the vibration (he felt it on a short drive before we hauled the boat out), but sales it is possible.

What do you guys think? Is the prop responsible?

BR

PS I know the hull needs a good cleaning. :)
IMG_2720.jpg
IMG_2721.jpg
IMG_2722.jpg
You do not have the required permissions to view the files attached to this post.
2019 Cobalt R3 - V8/350 - Ebony Hull w/ Knock Out Red Edge Stripe
User avatar
cmattj
Admiral
Admiral
Posts: 3963
Joined: Fri Jun 02, 2017 2:52 pm
Location: Stockton, California
Contact:

Re: R3 - Vibration

Post by cmattj »

From the pictures of the leading edge nick if it had caused a blade to move slightly from its natural rake, then yes.
Without experiencing it I’m not see anything alarming.
Have the props removed and checked for blade rake angle, and then balancing.
2008 272 , 496 HO fo SHO

California Delta
Table Rock Lake


#FARCON
BobRae99
Vice Admiral
Vice Admiral
Posts: 1161
Joined: Mon Jan 22, 2018 10:16 am
Location: Canada
Contact:

Re: R3 - Vibration

Post by BobRae99 »

cmattj wrote: Sun Sep 29, 2019 10:06 pm From the pictures of the leading edge nick if it had caused a blade to move slightly from its natural rake, then yes.
Without experiencing it I’m not see anything alarming.
Have the props removed and checked for blade rake angle, and then balancing.
Thanks, that's the plan. :)
2019 Cobalt R3 - V8/350 - Ebony Hull w/ Knock Out Red Edge Stripe
User avatar
tgrace98
Vice Admiral
Vice Admiral
Posts: 2730
Joined: Wed Jan 31, 2018 11:19 am
Location: Branson, MO
Contact:

Re: R3 - Vibration

Post by tgrace98 »

I have nothing to add to the vibration. But look at all the algae on the hull 😳
2019 Cobalt R7 VP 6.2 380hp
“Smooth Operator”

Lake St. Louis, MO
Table Rock Lake
User avatar
Big Block Power
Fleet Admiral
Fleet Admiral
Posts: 17930
Joined: Sat May 07, 2016 8:05 pm
Location: Neenah,Wi
Contact:

Re: R3 - Vibration

Post by Big Block Power »

tgrace98 wrote: Mon Sep 30, 2019 6:03 am I have nothing to add to the vibration. But look at all the algae on the hull 😳
That's Cobalt abuse. I Also think it's because of Malibu.

Bob the good thing is the r5 and 430 won't have that problem. See problem solved.

Yes any dent in a prop can cause a vibration. Is it causing this one. Had to say till next year if it's gone after they get fixed.
Another Member had to have his engine pulled as they found a issue with a bolt or coupler or something like that on their new boat. Find that thread of you can.
03Cobalt220 8.1gxi DP
"Kids in Tow2"
"Pot The Jus" Originator :-)
Neenah Wi
#ItsBu'sfault
#FARCON Marine CC Core!
User avatar
NautiGirl
Vice Admiral
Vice Admiral
Posts: 2849
Joined: Thu Jul 06, 2017 8:10 pm
Location: Kentucky
Been thanked: 1 time
Contact:

Re: R3 - Vibration

Post by NautiGirl »

Never mind the props...take that thing straight to the detailer. I can't even...
JEFF & KATIE
TeamNAUTI
Ebony Black 2017 R5 8.2 Big Block
CANDIED RED 2007 222 6.2L Merc - Sold
1997 190 4.3 Volvo - Peak Cobalt Design and Manufacturing
KENTUCKY
"Pudgy the had down harder!"
User avatar
AsLan7
Fleet Admiral
Fleet Admiral
Posts: 11517
Joined: Sat Jul 29, 2017 10:58 am
Location: Erie PA
Has thanked: 1 time
Been thanked: 6 times
Contact:

Re: R3 - Vibration

Post by AsLan7 »

Big Block Power wrote: Mon Sep 30, 2019 6:22 am
tgrace98 wrote: Mon Sep 30, 2019 6:03 am I have nothing to add to the vibration. But look at all the algae on the hull 😳
That's Cobalt abuse. I Also think it's because of Malibu.

.
:lol: ...good one.
2002 Cobalt 262
&
2005 Cobalt 263
496 MagHO
(sold )
Erie, PA
Currently boatless (for now)
will fly for food

(CChat moderator)
BobRae99
Vice Admiral
Vice Admiral
Posts: 1161
Joined: Mon Jan 22, 2018 10:16 am
Location: Canada
Contact:

Re: R3 - Vibration

Post by BobRae99 »

I knew I shouldn't have posted pictures. But, based on the last boat's condition after spring acid wash and cleanup, I know it will look like new this spring before I put it in the water. My preference is a lift, but there is no such facility at my marina, so its a cleanup every year.

BR

It won't be an R5, rather an R4 or R6. :)
2019 Cobalt R3 - V8/350 - Ebony Hull w/ Knock Out Red Edge Stripe
User avatar
tgrace98
Vice Admiral
Vice Admiral
Posts: 2730
Joined: Wed Jan 31, 2018 11:19 am
Location: Branson, MO
Contact:

Re: R3 - Vibration

Post by tgrace98 »

BobRae99 wrote: Mon Sep 30, 2019 9:13 am I knew I shouldn't have posted pictures. But, based on the last boat's condition after spring acid wash and cleanup, I know it will look like new this spring before I put it in the water. My preference is a lift, but there is no such facility at my marina, so its a cleanup every year.

BR

It won't be an R5, rather an R4 or R6. :)
spring acid wash?? I would want that done at winterization.
2019 Cobalt R7 VP 6.2 380hp
“Smooth Operator”

Lake St. Louis, MO
Table Rock Lake
User avatar
Big Block Power
Fleet Admiral
Fleet Admiral
Posts: 17930
Joined: Sat May 07, 2016 8:05 pm
Location: Neenah,Wi
Contact:

Re: R3 - Vibration

Post by Big Block Power »

Bob you know we would have never picked on it if you didn't say anything about it. Ok no we still would have.
It's going to be a long off season too find you a new even series boat for next year.
Thanks for helping us in Advance.
I'm glad your a good sport and you don't get your dps in a bundle. 😂😂
03Cobalt220 8.1gxi DP
"Kids in Tow2"
"Pot The Jus" Originator :-)
Neenah Wi
#ItsBu'sfault
#FARCON Marine CC Core!
User avatar
NautiGirl
Vice Admiral
Vice Admiral
Posts: 2849
Joined: Thu Jul 06, 2017 8:10 pm
Location: Kentucky
Been thanked: 1 time
Contact:

Re: R3 - Vibration

Post by NautiGirl »

tgrace98 wrote: Mon Sep 30, 2019 10:16 am
BobRae99 wrote: Mon Sep 30, 2019 9:13 am I knew I shouldn't have posted pictures. But, based on the last boat's condition after spring acid wash and cleanup, I know it will look like new this spring before I put it in the water. My preference is a lift, but there is no such facility at my marina, so its a cleanup every year.

BR

It won't be an R5, rather an R4 or R6. :)
spring acid wash?? I would want that done at winterization.
I couldn't sleep at night knowing my boat was tucked away in that condition. Do us all a favor and clean her up now!
JEFF & KATIE
TeamNAUTI
Ebony Black 2017 R5 8.2 Big Block
CANDIED RED 2007 222 6.2L Merc - Sold
1997 190 4.3 Volvo - Peak Cobalt Design and Manufacturing
KENTUCKY
"Pudgy the had down harder!"
shrfdeputy
Captain
Captain
Posts: 447
Joined: Thu Apr 26, 2018 9:53 am
Location: Wichita, Ks.
Contact:

Re: R3 - Vibration

Post by shrfdeputy »

Bob, have you considered the idea that the vibration is being caused by all those creatures trying to hold on while you're underway! :)
1995 252
VP 7.4 GL
User avatar
NautiGirl
Vice Admiral
Vice Admiral
Posts: 2849
Joined: Thu Jul 06, 2017 8:10 pm
Location: Kentucky
Been thanked: 1 time
Contact:

Re: R3 - Vibration

Post by NautiGirl »

shrfdeputy wrote: Mon Sep 30, 2019 5:15 pm Bob, have you considered the idea that the vibration is being caused by all those creatures trying to hold on while you're underway! :)
Sheriff Deputy has solved the case! Awesome work!
JEFF & KATIE
TeamNAUTI
Ebony Black 2017 R5 8.2 Big Block
CANDIED RED 2007 222 6.2L Merc - Sold
1997 190 4.3 Volvo - Peak Cobalt Design and Manufacturing
KENTUCKY
"Pudgy the had down harder!"
User avatar
tgrace98
Vice Admiral
Vice Admiral
Posts: 2730
Joined: Wed Jan 31, 2018 11:19 am
Location: Branson, MO
Contact:

Re: R3 - Vibration

Post by tgrace98 »

shrfdeputy wrote: Mon Sep 30, 2019 5:15 pm Bob, have you considered the idea that the vibration is being caused by all those creatures trying to hold on while you're underway! :)
Open and shut case Johnson!
2019 Cobalt R7 VP 6.2 380hp
“Smooth Operator”

Lake St. Louis, MO
Table Rock Lake
User avatar
Big Block Power
Fleet Admiral
Fleet Admiral
Posts: 17930
Joined: Sat May 07, 2016 8:05 pm
Location: Neenah,Wi
Contact:

Re: R3 - Vibration

Post by Big Block Power »

Bobrae how about trying some of this stuff.
https://www.auroramarine.com/store/vs72 ... -coat.html
03Cobalt220 8.1gxi DP
"Kids in Tow2"
"Pot The Jus" Originator :-)
Neenah Wi
#ItsBu'sfault
#FARCON Marine CC Core!
Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 62 guests