Gas Struts for engine cover 1999 200

[GrandBanks]

Hi All I would like to replace the gas struts on my 1999 200 engine cover. I can read the information on the side of the strut but can't find the replacement strut from Lift-O-Mat Any ideas on a replacement unit?

[dustinm]

Im interested in PN too. Our '97s are a little weak

[akorcovelos]

You’ll need to pull a few measurements to see if this is the one: https://www.magnusinc.com/1677et.html

[dustinm]

Using that link I found this - https://go.skimresources.com/?id=130832 ... %20%5B2%5D

"$29 for the pair.
The Stabilus spec from their website is 26.3" extended, 16.1" compressed, 31.5 lbs force.
The Truck Upfitters spec is 27.5" extended, 15.6" compressed, 38 lbs force."

I ordered a set will see how they work.

[akorcovelos]

Keep us posted!

[dustinm]

They work! I would say they are about the same strength as the originals as only one of ours was shot.

[AsLan7]

They work! I would say they are about the same strength as the originals as only one of ours was shot.

.
Nice...and thanks for the follow up with pic DM!