My R6 Surf build, what am I missing?
Re: My R6 Surf build, what am I missing?
I wonder if you have to use all three pieces at the same time?
2021 R6 Surf, VP 380, Pacific Blue and Ebony.
(former) 2019 R5, Volvo 350, ebony hull w/pacific blue stripe.
(former) 2019 R5, Volvo 350, ebony hull w/pacific blue stripe.
Re: My R6 Surf build, what am I missing?
I am wondering the same. I will reach out to my sales guy for an answer later this morning.
Those of you ordering the R6 Surf, are you going with the fixed tower (standard) or upgrading to the folding tower? Thanks
Those of you ordering the R6 Surf, are you going with the fixed tower (standard) or upgrading to the folding tower? Thanks
Re: My R6 Surf build, what am I missing?
I am getting the folding tower - more flexibility on winter storage. Though I haven't done the payback calculation on the potential extra storage cost vs the cost of the tower.
2021 R6 Surf
VP 380
VP 380
Re: My R6 Surf build, what am I missing?
Thanks for the reply. I have a lift so storage isn’t an issue. My two concerns are resale and not being able to access a couple area of the lake (access is probably less of a concern).
Re: My R6 Surf build, what am I missing?
I would probably do the folding arch as that is what is on my current R5. The big question for me is to go with the standard bimini which is what I have now or the more fixed sunshade. Deploying the bimini now is sort of a pain for me. Two person job for sure and I always feel like I’m doing origami.
2021 R6 Surf, VP 380, Pacific Blue and Ebony.
(former) 2019 R5, Volvo 350, ebony hull w/pacific blue stripe.
(former) 2019 R5, Volvo 350, ebony hull w/pacific blue stripe.
Re: My R6 Surf build, what am I missing?
I think the fixed and rotating sunshades look a bit less “integrated” plus they are always overhead, even when out for an evening cruise and there is no overhead sun. Finally, I’m not sure but I think the Bimini on the R3, 5, 7 has more area then the fixed/rotating shade but I haven’t measured them both. I agree the Bimini is a lot of fiddling to put up and take down though.tfarmer wrote: Sat Dec 12, 2020 6:25 pm I would probably do the folding arch as that is what is on my current R5. The big question for me is to go with the standard bimini which is what I have now or the more fixed sunshade. Deploying the bimini now is sort of a pain for me. Two person job for sure and I always feel like I’m doing origami.
2019 Cobalt R3 - V8/350 - Ebony Hull w/ Knock Out Red Edge Stripe
Re: My R6 Surf build, what am I missing?
My order is in...basically every option discussed above except TT's...once again (after I said that many people told me to get TTs) dealer said he wouldn't recommend for the R6 Surf at Tahoe. He drove with/without at the dealer meeting Orlando and said he wouldn't get for his own boat on Tahoe unless R30 or similar. So...anyway, my order (basically all white with Navy stripe) is on order and hopefully ready for summer in Tahoe!
2021 R6 Surf
VP 380
VP 380
Re: My R6 Surf build, what am I missing?
Where in Tahoe are you? I am in the Keys.carrera wrote: Sun Dec 27, 2020 7:35 pm My order is in...basically every option discussed above except TT's...once again (after I said that many people told me to get TTs) dealer said he wouldn't recommend for the R6 Surf at Tahoe. He drove with/without at the dealer meeting Orlando and said he wouldn't get for his own boat on Tahoe unless R30 or similar. So...anyway, my order (basically all white with Navy stripe) is on order and hopefully ready for summer in Tahoe!
2017 R5 350HP Mercruiser Bravo III
Northridge, CA
Big Bear Lake, CA
South Lake Tahoe, CA
Northridge, CA
Big Bear Lake, CA
South Lake Tahoe, CA
-
R6outboard
- Commander

- Posts: 89
- Joined: Sat Nov 14, 2020 7:52 pm
- Contact:
Re: My R6 Surf build, what am I missing?
Quick note on the tower Bimini being fixed/ rotating verse folding. I chose the fixed/ rotating on my R6 in order to get the sail shades for the front and back. Anyone else see this "issue" on the cobalt configurator? Says you can only get the sail shades with the fixed/ rotating tower?
Re: My R6 Surf build, what am I missing?
That appears to be correct. It must have something to do with teh way the rear shade attaches. I'm not sure if you can use either front or rear shade while teh boat is moving though, not that I see that as a problem.R6outboard wrote: Sat Jan 16, 2021 7:26 am Quick note on the tower Bimini being fixed/ rotating verse folding. I chose the fixed/ rotating on my R6 in order to get the sail shades for the front and back. Anyone else see this "issue" on the cobalt configurator? Says you can only get the sail shades with the fixed/ rotating tower?
2019 Cobalt R3 - V8/350 - Ebony Hull w/ Knock Out Red Edge Stripe
-
lespaulrob
- Commander

- Posts: 145
- Joined: Mon Jul 06, 2020 1:41 pm
- Location: Nashville, TN
- Contact:
Re: My R6 Surf build, what am I missing?
Today is the day they start production on my R6 Surf! Whoooo hoooooooooooooo!
2021 R6 Surf VP380, platinum sound
- Big Block Power
- Fleet Admiral

- Posts: 17930
- Joined: Sat May 07, 2016 8:05 pm
- Location: Neenah,Wi
- Contact:
Re: My R6 Surf build, what am I missing?
That's pretty exciting!
03Cobalt220 8.1gxi DP
"Kids in Tow2"
"Pot The Jus" Originator :-)
Neenah Wi
#ItsBu'sfault
#FARCON Marine CC Core!
"Kids in Tow2"
"Pot The Jus" Originator :-)
Neenah Wi
#ItsBu'sfault
#FARCON Marine CC Core!
Re: My R6 Surf build, what am I missing?
Great news. Shouldn't be a long wait. Mine started production at the end of December is scheduled to ship February 10th.
Who is online
Users browsing this forum: Ahrefs [Bot] and 21 guests

