New Boat Must Have - Trim Tabs

(R3-R8, R30, R35)
FirstStar
Commander
Commander
Posts: 98
Joined: Sat Nov 07, 2020 8:13 pm
Has thanked: 1 time
Contact:

New Boat Must Have - Trim Tabs

Post by FirstStar »

I was lurking around here a lot before I ordered our new R5 and appreciated the comments about must have items. In the spirit of giving back I thought I would post about one of my must haves. I was on The Lake of the Ozarks last weekend - that is one rough lake. Without the trim tabs the bow of the boat was slamming on a lot of waves. Trimmed them all the way down it made a huge difference. No more slamming into waves, the R5 cut through almost all of them. The auto setting is also nice just to make the boat ride level by compensating for uneven loads or wind. Overall a great system and would put on the must have list.
2021 Cobalt R5 6.2 380
CobaltDeadHead
Captain
Captain
Posts: 396
Joined: Tue Aug 11, 2020 3:49 pm
Location: New Hampshire
Contact:

Re: New Boat Must Have - Trim Tabs

Post by CobaltDeadHead »

Somewhat surprises me they're not a standard option. I would not want a boat without them.
2005 Cobalt 24SX 350Mag
2010 Key West 186 DC - retired
Lake Winnipesaukee
User avatar
Tuscany
Admiral
Admiral
Posts: 3477
Joined: Sun Sep 25, 2016 11:28 am
Location: near Buffalo, NY
Contact:

Re: New Boat Must Have - Trim Tabs

Post by Tuscany »

Absolutely and without doubt the most important, “never go without” option.
Tabs can definitely change unbearable conditions to tolerable with a simple deploy.
2017 Cobalt R7
"Cobalt" Blue
6.2L VP 380 or 430

#FARCON Marine
MikeBo
Commander
Commander
Posts: 197
Joined: Mon Jun 18, 2018 6:17 pm
Location: Stilwell, Ks.
Contact:

Re: New Boat Must Have - Trim Tabs

Post by MikeBo »

I rarely use mine, I must be missing something.
Cobalt 292, white with blue sport stripes, twin Volvo 5.7’s.

Stilwell Ks, boat at Tablerock
FirstStar
Commander
Commander
Posts: 98
Joined: Sat Nov 07, 2020 8:13 pm
Has thanked: 1 time
Contact:

Re: New Boat Must Have - Trim Tabs

Post by FirstStar »

MikeBo wrote: Thu Jun 24, 2021 9:17 pm I rarely use mine, I must be missing something.
I could see that depending on where on Table Rock (my favorite lake) you boat. Up by Shell Knob were we typically boat the wind and the waves aren't as big of a factor. Lake of the Ozarks is all wind and waves :D
2021 Cobalt R5 6.2 380
User avatar
dsthomas
Captain
Captain
Posts: 436
Joined: Thu Jan 16, 2020 7:01 am
Location: KC, MO
Contact:

Re: New Boat Must Have - Trim Tabs

Post by dsthomas »

I had tabs on my A25, when we ordered our r7surf they were not an option due to how the surf tabs work. The R6/8 Surf they can be ordered and I’m looking forward to upgrading for that alone. It’ll be a while as this is only our second summer with this boat, but I agree they are must have for sure!
Kansas City, MO
2011 242 VP 5.7 GXi (Sold)
2016 A25 VP 350 (Sold)
2020 R7 Surf VP 380 (Sold)
2022 R8 Surf VP 380
User avatar
bruceb58
Vice Admiral
Vice Admiral
Posts: 1257
Joined: Tue Nov 24, 2020 11:10 pm
Location: Lake Tahoe
Contact:

Re: New Boat Must Have - Trim Tabs

Post by bruceb58 »

I have my R5 on Lake Tahoe which can get very rough. Not needed at all.
2017 R5 350HP Mercruiser Bravo III
Northridge, CA
Big Bear Lake, CA
South Lake Tahoe, CA
carrera
Commander
Commander
Posts: 81
Joined: Wed Oct 16, 2019 12:39 am
Contact:

Re: New Boat Must Have - Trim Tabs

Post by carrera »

bruceb58 wrote: Fri Jun 25, 2021 11:58 pm I have my R5 on Lake Tahoe which can get very rough. Not needed at all.
I posted elsewhere about this, but when I ordered my R6 Surf (for Tahoe), the dealer strongly recommended against ordering TT's. Sounds like you'd agree with that.

PS, as also posted elsewhere, I am still waiting for my boat...several months behind schedule.
2021 R6 Surf
VP 380
FirstStar
Commander
Commander
Posts: 98
Joined: Sat Nov 07, 2020 8:13 pm
Has thanked: 1 time
Contact:

Re: New Boat Must Have - Trim Tabs

Post by FirstStar »

The other thing I should add is my dealer told me that the auto trim tabs were hard to add after the boat was built. Something about the calibration of the unit.
2021 Cobalt R5 6.2 380
CobaltDeadHead
Captain
Captain
Posts: 396
Joined: Tue Aug 11, 2020 3:49 pm
Location: New Hampshire
Contact:

Re: New Boat Must Have - Trim Tabs

Post by CobaltDeadHead »

bruceb58 wrote: Fri Jun 25, 2021 11:58 pm I have my R5 on Lake Tahoe which can get very rough. Not needed at all.
While I suppose not "needed" I find on big water I can cruise about 5-10 mph faster using the tabs in the same comfort. More of a luxury really.
2005 Cobalt 24SX 350Mag
2010 Key West 186 DC - retired
Lake Winnipesaukee
User avatar
greenhut
Captain
Captain
Posts: 315
Joined: Mon Jun 25, 2018 11:18 am
Location: Lake Lanier, GA
Contact:

Re: New Boat Must Have - Trim Tabs

Post by greenhut »

Love the trim tabs on our R5. Mostly use for port/starboard balance vs waves, but have also use to change pitch. Agree if you are ordering a new boat a no-brainer. Wish I had ordered the rudder indicator from the factory. Bought the parts, but been a chicken to install.
2020 Cobalt R5
Ebony/KO Red boot stripe
VP V8-380-DP, Trim Tabs
Arch, Interior LED, ACR
Prem Sound, Sea Grass
Blue UW Lights
Mooring Cover
User avatar
AsLan7
Fleet Admiral
Fleet Admiral
Posts: 11505
Joined: Sat Jul 29, 2017 10:58 am
Location: Erie PA
Has thanked: 1 time
Been thanked: 5 times
Contact:

Re: New Boat Must Have - Trim Tabs

Post by AsLan7 »

After owning multiple boats with and without tabs, I wouldn’t own another without tabs (unless it’s a surf model for obvious reasons).
In fact it was the first thing we added (Bennet electric with auto retract and digital indicators) when we purchased our 263. Deep Vee hulls cut through waves nicely but their draw back can be listing depending on load and/or crosswinds. . Lake Erie kicked up with 3-5’s yesterday plus 15-20 mph winds gusting to 30 and they helped improve the ride easily as well. No brainer IMHO.

.
You do not have the required permissions to view the files attached to this post.
2002 Cobalt 262
&
2005 Cobalt 263
496 MagHO
(sold )
Erie, PA
Currently boatless (for now)
will fly for food

(CChat moderator)
User avatar
Krob1114
Vice Admiral
Vice Admiral
Posts: 1876
Joined: Sun Jun 09, 2019 8:03 am
Location: Greer’s Ferry Lake, AR
Contact:

Re: New Boat Must Have - Trim Tabs

Post by Krob1114 »

AsLan7 wrote: Sat Jun 26, 2021 9:14 am Lake Erie kicked up with 3-5’s yesterday plus 15-20 mph winds gusting to 30 and they helped improve the ride easily as well. No brainer IMHO.

.
Too big for us!
1-2' is tough.
2019 Cobalt R3 @ Greers Ferry Lake, AR
Home in Hernando, MS
NW Dave
Lieutenant
Lieutenant
Posts: 36
Joined: Tue Dec 08, 2020 11:28 pm
Location: Washington State
Contact:

Re: New Boat Must Have - Trim Tabs

Post by NW Dave »

carrera wrote: Sat Jun 26, 2021 12:46 am
bruceb58 wrote: Fri Jun 25, 2021 11:58 pm I have my R5 on Lake Tahoe which can get very rough. Not needed at all.
I posted elsewhere about this, but when I ordered my R6 Surf (for Tahoe), the dealer strongly recommended against ordering TT's. Sounds like you'd agree with that.

PS, as also posted elsewhere, I am still waiting for my boat...several months behind schedule.
Same here. For the Surf model, my dealer recommended against getting the trim tabs option as well. Never having had the option before, ignorance is bliss at the moment for me. :lol:
2021 R6 Surf with VP 380
Lake Washington, Greater Seattle Area
lespaulrob
Commander
Commander
Posts: 145
Joined: Mon Jul 06, 2020 1:41 pm
Location: Nashville, TN
Contact:

Re: New Boat Must Have - Trim Tabs

Post by lespaulrob »

My lake here in Tennessee is ROUGH as well. I got the trim tabs and I have to say I'll never have another boat without them. It really does smooth things out when the waves and traffic gets crazy. I'm running 30+ MPH COMFORTABLY while the tow boats are barely able to keep it above 10mph due to the waves.
2021 R6 Surf VP380, platinum sound
Post Reply

Who is online

Users browsing this forum: No registered users and 24 guests