Instrumentation screen has power, but gauges don't read

Caskeycobalt · Post by **Caskeycobalt** » Fri Jul 10, 2020 9:47 pm

Got on my boat this evening and the instrumentation screens kicked off just fine. However, the gauges didn't have a reading. (i.e. engine temp, rpm, trim, etc. didn't have any data. Neither did the depth finder. Wonder if it is just a blown fuse. If so, where is that devil so I can check it.

AsLan7 · Post by **AsLan7** » Fri Jul 10, 2020 11:04 pm

.
Hey CC. Welcome to the Cobaltchat forum. So glad you found us!

Circuit breakers are located under the dash. See anything popped?

How about a pic?

Again welcome aboard mate!

.

Big Block Power · Post by **Big Block Power** » Sat Jul 11, 2020 6:35 am

My bad what kind of boat do you have?
The signature line works great for this kind of info and where you are from?

Caskeycobalt · Post by **Caskeycobalt** » Sat Jul 11, 2020 7:47 am

2017 R30. Lake Texoma... north of Dallas.

higginspa1371 · Post by **higginspa1371** » Tue Sep 22, 2020 10:22 am

Happens with my R5. Turn ignition off and restart and that usually works. Not that I should have too

tgrace98 · Post by **tgrace98** » Tue Sep 22, 2020 1:10 pm

Sounds to me like the nema2000 adapter that pulls from the ECU's is acting up. With it being a 2017 I would be taking it to the dealer for a warranty claim.

Traveller14 · Post by **Traveller14** » Sat Oct 10, 2020 9:10 am

I have a 2019 R5 and recently the blower and gauges do not come on for about 2 minutes - usually after I have pulled out of the slip. Has anyone had that issue before. The red light for the blower comes on immediately

Cobalt Boats Forum

Instrumentation screen has power, but gauges don't read

Instrumentation screen has power, but gauges don't read

Re: Instrumentation screen has power, but gauges don't read

Re: Instrumentation screen has power, but gauges don't read

Re: Instrumentation screen has power, but gauges don't read

Re: Instrumentation screen has power, but gauges don't read

Re: Instrumentation screen has power, but gauges don't read

Re: Instrumentation screen has power, but gauges don't read

Who is online