Bravo 3 Prop Wrench

[bruceb58]

Which prop wrench are people using?

[Big Block Power]

It's all over ebay if needed. I made my own out of a large socket.

[vans]

After using a pipe wrench a couple times I bought one off ebay

[Auburnbuilder]

I bought this one, it works very well and will not rust.

https://www.hillmarine.com/Bravo-Three-Wrench-p/b3w.htm

[AsLan7]

I bought this one, it works very well and will not rust.

https://www.hillmarine.com/Bravo-Three-Wrench-p/b3w.htm

.
That's the same one we use as well. We just keep it in the boat just in case.

[Auburnbuilder]

I keep mine in boat as well, thats why I got the stainless version. I also recommend a prop block, make changes much easier.

[Auburnbuilder]

Here is the prop block I use:

[bruceb58]

I bought this one, it works very well and will not rust.

https://www.hillmarine.com/Bravo-Three-Wrench-p/b3w.htm

I ended up buying this one too to keep on the boat. I also bought a couple other ones that allow you to use a torque wrench for work at home.

[clm0fiz]

All stainless is nice, but this one a a piece of 2x4 as a block work fine for me.

Rite Hite prop wrench.JPG

[bruceb58]

All stainless is nice, but this one a a piece of 2x4 as a block work fine for me.
Rite Hite prop wrench.JPG

Problem is, that will fit neither nut on a Bravo 3, at least not my Bravo 3.

1-7/16” is the outside nut size and 2-3/4” is the inside nut size on mine

[Big Block Power]

All stainless is nice, but this one a a piece of 2x4 as a block work fine for me.
Rite Hite prop wrench.JPG

Correct that works great on the Alpha 3!

[dogwspts]

I have one but a big pair of channel locks do the same.

[bruceb58]

I have one but a big pair of channel locks do the same.

glad you don't touch my boat

[dustinm]

Why ? It will match all the scratches from the rocks in your shoes

[dogwspts]

I have the socket but the Chanel Locks work just as good no harm to the big fat nut. I am very OCD about my boat.