2007 343 Anchor Nav Rocker Switch

[ryandavidwood]

My anchor nav switch has gone out on my 2007 343. I guess it is a switch that is no longer made. VJDK with 8 prongs. Every switch someone tells me will work is a 7 prong rocker switch and it does not work. The anchor/nav switch controls all the other switch lights and the dash gauges. Does anyone know where to find one or have a wiring diagram on 343 to rewire it? This has even the Cobalt dealer stumped!

[Big Block Power]

Get us a picture. Bruce can hook you up I bet.

[AsLan7]

.
That’s a tough one RDW.

Are you able to rebuild it? We rebuilt our engine hatch switch.

Yes provide a pic.

And so glad you found us. Welcome aboard mate!

.

[ryandavidwood]

Here are some pictures of the factory switch. It is an 8 prong switch. (2 were broken off while removing it) Only 6 of the prongs were used skipping one on each side. Below are some pictures. Thank you for everyone's help!

[Holy Smokes]

You might ask this supplier. Looks like a VJD1 is close and does the same task. The "exposed" cap just snaps off and back on the new switch.

https://newwiremarine.com/product/on-of ... dent-lamp/

[ryandavidwood]

VJD1 didn't work. It looks like it is going to be a rewire job to get a new rocker switch to work. Does anyone know where I could get a wiring diagram for a 343?

[kas232ca]

I have a 2006 and mine went bad too. Mine was a toggle switch, but same concept. Nav / Off / Anchor I bought a standard Nav light toggle, but it was slightly different, and couldn't figure it out, so I gave the switch to the mechanic. He said he had to make a jumper and now it apparently works.