Hello
I have tried without success to find the appropriate kill switch lanyard for my 5.7 GSI PEFS (serial number 4012037948 if that helps) on my 2001 226.
Can anyone suggest a site to find one, or the part number?
I’m sure it’s something simple but just not having any luck
Thanks in advance
Kill switch lanyard for 2001 226
-
Titaniumboy
- Rear Admiral

- Posts: 653
- Joined: Sun Jul 19, 2020 12:55 am
- Location: California
- Contact:
Re: Kill switch lanyard for 2001 226
Do you have a picture of where the kill switch plugs in?
2007 Cobalt 240 with Merc 496 MAG Bravo 3
1977 18’ Beachcraft with Ford 302 V8 OMC 190
Whiskey Slough Marina
Holt, CA
1977 18’ Beachcraft with Ford 302 V8 OMC 190
Whiskey Slough Marina
Holt, CA
Re: Kill switch lanyard for 2001 226
This is the switch
Please let me know what you think
Thanks again
Please let me know what you think
Thanks again
You do not have the required permissions to view the files attached to this post.
-
Titaniumboy
- Rear Admiral

- Posts: 653
- Joined: Sun Jul 19, 2020 12:55 am
- Location: California
- Contact:
Re: Kill switch lanyard for 2001 226
What do the letters say on the left side? Is that a broken piece of black plastic behind the toggle switch?
Maybe there are other identifying marks on the back side?
Edit: Never mind, found it. It turns out that it is not a Volvo Penta part at all, but is an aftermarket kill switch called Saf-T-Stop made by TH Marine.
https://thmarinesupplies.com/products/ ... 9272043558
You are looking for TH Marine part number L-4-DP.
Maybe there are other identifying marks on the back side?
Edit: Never mind, found it. It turns out that it is not a Volvo Penta part at all, but is an aftermarket kill switch called Saf-T-Stop made by TH Marine.
https://thmarinesupplies.com/products/ ... 9272043558
You are looking for TH Marine part number L-4-DP.
You do not have the required permissions to view the files attached to this post.
2007 Cobalt 240 with Merc 496 MAG Bravo 3
1977 18’ Beachcraft with Ford 302 V8 OMC 190
Whiskey Slough Marina
Holt, CA
1977 18’ Beachcraft with Ford 302 V8 OMC 190
Whiskey Slough Marina
Holt, CA
-
Titaniumboy
- Rear Admiral

- Posts: 653
- Joined: Sun Jul 19, 2020 12:55 am
- Location: California
- Contact:
Re: Kill switch lanyard for 2001 226
I bet one of these would work in a pinch. All you’re looking for is a loop that is “caught” by the toggle switch being in the RUN position. Cheap experiment. If it works then you have a backup lanyard, which you are going to want to have.
https://www.amazon.com/dp/B09Y8VCC76/r ... ljaz10cnVl
https://www.amazon.com/dp/B09Y8VCC76/r ... ljaz10cnVl
You do not have the required permissions to view the files attached to this post.
2007 Cobalt 240 with Merc 496 MAG Bravo 3
1977 18’ Beachcraft with Ford 302 V8 OMC 190
Whiskey Slough Marina
Holt, CA
1977 18’ Beachcraft with Ford 302 V8 OMC 190
Whiskey Slough Marina
Holt, CA
Re: Kill switch lanyard for 2001 226
That’s great, I very much appreciate all your help! Mystery finally solved!
Who is online
Users browsing this forum: No registered users and 3 guests
