2020 Gen 5 V6 block pressure zero
2020 Gen 5 V6 block pressure zero
Looking for help please, Have a 2020 Cobalt 200s with the Gen 5 V6 4.3 engine, Dash shows block pressure zero psi, have been searching for the sensor that everybody says is at the rear of the engine on the water hose but I believe they are talking about the generation before, as the Gen 5 has no such location. Chatting with dealers is turning out to be painful, contacted a dealer to order a sensor and they say the sensor is not in their system for that engine, so where does the dash get its info
- AsLan7
- Fleet Admiral

- Posts: 11467
- Joined: Sat Jul 29, 2017 10:58 am
- Location: Erie PA
- Has thanked: 1 time
- Been thanked: 4 times
- Contact:
Re: 2020 Gen 5 V6 block pressure zero
.
So glad you found us wheelnut.
Sounds like you’re on the right track looking at replacing a sensor with a zero reading on the block pressure.
I’m familiar with the rear one on the hose in the Mercs as well having owned an earlier gen Merc. Have you done a Google search for the schematic for this gen?
And welcome aboard mate.
So glad you found us wheelnut.
Sounds like you’re on the right track looking at replacing a sensor with a zero reading on the block pressure.
I’m familiar with the rear one on the hose in the Mercs as well having owned an earlier gen Merc. Have you done a Google search for the schematic for this gen?
And welcome aboard mate.
You do not have the required permissions to view the files attached to this post.
2002 Cobalt 262
&
2005 Cobalt 263
496 MagHO
(sold )
Erie, PA
Currently boatless (for now)
will fly for food
(CChat moderator)
&
2005 Cobalt 263
496 MagHO
(sold )
Erie, PA
Currently boatless (for now)
will fly for food
(CChat moderator)
Re: 2020 Gen 5 V6 block pressure zero
Thanks for the reply, yes have been searching up and down the internet for 3 days now and can't find any wiring diagrams for this Gen 5 engine. I have also looked close up at many photos and paused videos of the engine on a stand or at a show and can't see any sensors that stand out
Re: 2020 Gen 5 V6 block pressure zero
Are you seeing this in the 4-1 gauge? Has it ever read correctly? I’m not sure non evc Volvos actually transmit that info to the gauge.
2022 CS23 Volvo 280/DP
- jhnmdahl
- Vice Admiral

- Posts: 2386
- Joined: Tue Jan 06, 2015 5:11 pm
- Location: Twin Cities, MN
- Has thanked: 3 times
- Been thanked: 3 times
- Contact:
Re: 2020 Gen 5 V6 block pressure zero
Per the owner's manual, p. 3-23, there is no water pressure sensor on the Volvo engines that year. It's mentioned under "Block Pressure."
Administrator of the www.cobaltchat.com Cobalt boats community forum
2015 210 (Volvo Penta 5.7L V8-225)
2015 210 (Volvo Penta 5.7L V8-225)
Re: 2020 Gen 5 V6 block pressure zero
Thanks, It is the 5'' gauge with the 2 buttons on the bottom, i will try to show a photo. Only had the boat a couple of weeks and it didn't show pressure when I got it, but something to putting the boat into limp modeMatts19 wrote: Thu Jul 20, 2023 8:52 pm Are you seeing this in the 4-1 gauge? Has it ever read correctly? I’m not sure non evc Volvos actually transmit that info to the gauge.
You do not have the required permissions to view the files attached to this post.
Re: 2020 Gen 5 V6 block pressure zero
Thanks for the info, that's interesting, I wonder why the boat won't pull up onto plane, it only goes about 10 mph WOT with trim downjhnmdahl wrote: Thu Jul 20, 2023 8:57 pm Per the owner's manual, p. 3-23, there is no water pressure sensor on the Volvo engines that year. It's mentioned under "Block Pressure."
Re: 2020 Gen 5 V6 block pressure zero
The speed also shows zero when on the water and while pushing hose water up the tube, would this cause LIMP mode ?
- Krob1114
- Vice Admiral

- Posts: 1876
- Joined: Sun Jun 09, 2019 8:03 am
- Location: Greer’s Ferry Lake, AR
- Contact:
Re: 2020 Gen 5 V6 block pressure zero
I didn't realize you could buy a Cobalt in 2020 that still had gauges.
2019 Cobalt R3 @ Greers Ferry Lake, AR
Home in Hernando, MS
Home in Hernando, MS
Who is online
Users browsing this forum: Ahrefs [Bot] and 6 guests

