I think this might fit into upgrade, but since I think this has been a giant colossal waste of money I thought I would put it in this thread.
I had been debating about Aqua Marine deck or Sea dek flooring. However, I was not ready to have this stuff adhered to the floor to where I cannot pull it up to clean things out, but I wanted something to put down to make the floor a little more cushiony and attractive. So I ordered the Duraweave Teak 503 from MatWorks Ltd.
I got my mats and started to install the pieces from the aft to the bow. I got the first piece down and went to get the second piece. As I stepped onto the piece I just laid down I quickly jumped back and let a few cuss words out. The matieral was freakin' HOT.
I got out my laser thermometer and thermal camera out. The mat got to 153 degrees vs the white deck was 113 degrees. I figured the material would be warmed but not 40 degrees hotter and hot enough to cause a burn in a second of contact time!
When I contacted Matworks they said they do not do refunds and that since they dont make the Duraweave material I would have to talk with the makers of the Duraweave material, Infinity Luxury Woven Vynil.

So now I have a fight on my hands.
Here are a couple links to thermal imagining videos.
https://drive.google.com/open?id=1k5dTV ... 8_GbeQhOag
https://drive.google.com/open?id=1nCOK7 ... ElFT9IQ3Su
https://drive.google.com/open?id=1ORV8d ... 62exgX1Ovh
IMG_0001.JPG
IMG_9078.jpg
You do not have the required permissions to view the files attached to this post.