24 sx steering issue
24 sx steering issue
New to the chat group. I have a 2006 24sx that I have been refurbishing. A few weeks ago the steering became difficult. I pulled the ram and had it rebuilt and have refitted. The ram works great without the steering cable attached. When I attach the steering cable, it will not activate the ram shuttle valve. With the steering cable off the ram, the wheel turns easily and does not seem to be binding anywhere. Once reattached to the ram the steering becomes stiff again and does not activate the PAS shuttle valve. Is there and adjustment I am missing or is there some trick to getting this working? I am slightly perplexed and I don't want to pull a new steering cable unless it is necessary.
- AsLan7
- Fleet Admiral

- Posts: 11470
- Joined: Sat Jul 29, 2017 10:58 am
- Location: Erie PA
- Has thanked: 1 time
- Been thanked: 4 times
- Contact:
Re: 24 sx steering issue
.
Hey TD...welcome to the CobaltChat forum. So glad you found us!
Dumb questions but I'm sure you checked the power steering pump (pretty reliable really) or checked for any gunked up/hardened grease on any of the cable ends correct? I don't know of any adjustments on that valve. It sounds like from the helm on down everything is working.
Can you provide any pictures?
Others will chime in shortly.
Let's get you back on the water steering freely....and again, welcome aboard mate!
.
Hey TD...welcome to the CobaltChat forum. So glad you found us!
Dumb questions but I'm sure you checked the power steering pump (pretty reliable really) or checked for any gunked up/hardened grease on any of the cable ends correct? I don't know of any adjustments on that valve. It sounds like from the helm on down everything is working.
Can you provide any pictures?
Others will chime in shortly.
Let's get you back on the water steering freely....and again, welcome aboard mate!
.
You do not have the required permissions to view the files attached to this post.
2002 Cobalt 262
&
2005 Cobalt 263
496 MagHO
(sold )
Erie, PA
Currently boatless (for now)
will fly for food
(CChat moderator)
&
2005 Cobalt 263
496 MagHO
(sold )
Erie, PA
Currently boatless (for now)
will fly for food
(CChat moderator)
Re: 24 sx steering issue
Thanks for the reply. I have cleaned and greased the cable end that enters the ram and the ram rod has been greased as well. The teleflex cable when attached does not seem to actuate the shuttle valve on the ram. The power steering pump seems to be ok since it moves the ram when detached from the teleflex cable and I operate the ram with my hand. I hate to just guess at the issue, but at this point I think its the teleflex cable. It doesn't seem to bind when unattached, but possibly binds when positioned to attach to the ram. I will take a few pics and post them. Unfortunately, i work odd hours and have to start and stop working on this issue.
You do not have the required permissions to view the files attached to this post.
Re: 24 sx steering issue
Update: Sorry so slow to get back to this. Replaced the steering cable, all 30 feet of it. An considering I am a six footer it was difficult squeezing into a few of the tight spaces. I then rebled the power steering system and now it is back to normal. Thank you for responding to this issue. I have learned more about power assisted steering than I wanted to.
- Krob1114
- Vice Admiral

- Posts: 1876
- Joined: Sun Jun 09, 2019 8:03 am
- Location: Greer’s Ferry Lake, AR
- Contact:
Re: 24 sx steering issue
Glad it worked out for you....wait until you're 6' and old.Tampadan wrote: Wed Apr 28, 2021 8:02 am Update: Sorry so slow to get back to this. Replaced the steering cable, all 30 feet of it. An considering I am a six footer it was difficult squeezing into a few of the tight spaces. I then rebled the power steering system and now it is back to normal. Thank you for responding to this issue. I have learned more about power assisted steering than I wanted to.
2019 Cobalt R3 @ Greers Ferry Lake, AR
Home in Hernando, MS
Home in Hernando, MS
- AsLan7
- Fleet Admiral

- Posts: 11470
- Joined: Sat Jul 29, 2017 10:58 am
- Location: Erie PA
- Has thanked: 1 time
- Been thanked: 4 times
- Contact:
Re: 24 sx steering issue
.Tampadan wrote: Wed Apr 28, 2021 8:02 am Update: Sorry so slow to get back to this. Replaced the steering cable, all 30 feet of it. An considering I am a six footer it was difficult squeezing into a few of the tight spaces. I then rebled the power steering system and now it is back to normal. Thank you for responding to this issue. I have learned more about power assisted steering than I wanted to.
Hey thanks for the follow-up TD. Enjoy your seamless steering operation as you slice through that slalom course.
.
2002 Cobalt 262
&
2005 Cobalt 263
496 MagHO
(sold )
Erie, PA
Currently boatless (for now)
will fly for food
(CChat moderator)
&
2005 Cobalt 263
496 MagHO
(sold )
Erie, PA
Currently boatless (for now)
will fly for food
(CChat moderator)
Re: 24 sx steering issue
and fat.... ah... fluffy.. ah er less flexable . yeah. that's it, less flexable.Krob1114 wrote: Wed Apr 28, 2021 8:09 amGlad it worked out for you....wait until you're 6' and old.Tampadan wrote: Wed Apr 28, 2021 8:02 am Update: Sorry so slow to get back to this. Replaced the steering cable, all 30 feet of it. An considering I am a six footer it was difficult squeezing into a few of the tight spaces. I then rebled the power steering system and now it is back to normal. Thank you for responding to this issue. I have learned more about power assisted steering than I wanted to.
Capt Bob
Admiral Elaine
Currently a whole lot less Boatless, Now have possession of a new R5!
2020 R5 6.2 350 HP Merc
Admiral Elaine
Currently a whole lot less Boatless, Now have possession of a new R5!
2020 R5 6.2 350 HP Merc
Who is online
Users browsing this forum: No registered users and 0 guests

