I'll take this GMC over those Super Rust buckets any day. C'mon Tusc - how those buckets hold up to salt up our way?cmattj wrote: Wed Jan 23, 2019 1:42 pmLet me drop more subliminal pics to bring you back pal!Tuscany wrote: Wed Jan 23, 2019 1:27 pm Looks like the designers of the Sierra won’t have to deal with the backlash of the Chevy.
Actually, a very nice looking truck. Buttttt, I’ll be waiting for the new Super Duty...
https://jalopnik.com/the-2020-gmc-sierr ... 1831971552cmon..
2020 GMC 2500
Re: 2020 GMC 2500
2002 190
5.0L Volvo Penta GL
#FARCONCEO
5.0L Volvo Penta GL
#FARCONCEO
Re: 2020 GMC 2500
Haha, c'mon Liquid, aluminum doesn't rust!
Ive always had both, and usually at the same time. (Geez, that doesn't sound right).. let it go YT!
I've always had two trucks. A GM gasser for the business that we used for winter and plowing.. you know, disposable.. and a Ford Diesel for me that I store from winter and trick out a little. I sold my last Super Duty right before the body change. It's getting replaced next spring when the 10 speed Powerstroke hits the road in 2020.
I'm still keeping the GMC.
2017 Cobalt R7
"Cobalt" Blue
6.2L VP 380 or 430
#FARCON Marine
"Cobalt" Blue
6.2L VP 380 or 430
#FARCON Marine
- no_rulz25
- Captain

- Posts: 226
- Joined: Thu Jan 25, 2018 10:48 am
- Location: Fernandina Beach, FL
- Contact:
Re: 2020 GMC 2500
I'll stick with my Denali!!
You do not have the required permissions to view the files attached to this post.
2013 24SD
Volvo Penta 300
"Nautical Nonsense"
Volvo Penta 300
"Nautical Nonsense"
Re: 2020 GMC 2500
Looking good!!no_rulz25 wrote: Thu Feb 28, 2019 9:19 am I'll stick with my Denali!!
35629064_10157484145008496_1719684809166422016_n.jpg
2008 272 , 496 HO fo SHO
California Delta
Table Rock Lake
#FARCON
California Delta
Table Rock Lake
#FARCON
Re: 2020 GMC 2500
I might be on the fence if GM would have comparable hp/tq numbers, but it looks like GM will sadly stand pat while Ford and Ram will be producing 100 lbs of torque advantage.. I am definitely not on the fence..
2017 Cobalt R7
"Cobalt" Blue
6.2L VP 380 or 430
#FARCON Marine
"Cobalt" Blue
6.2L VP 380 or 430
#FARCON Marine
-
Mikes220
- Lieutenant

- Posts: 43
- Joined: Mon Aug 20, 2018 3:45 pm
- Location: Nw of San Antonio,Tx. Texas
- Contact:
Re: 2020 GMC 2500
I had a 2013 F150 with the 5.0L engine. I enjoyed the ride and it got decent fuel economy.
However, here in S. Texas the water levels fluctuate so widely you never know what you are going to face at the boat ramps. I convinced myself I need 4 wheel drive. I traded for a 2016 F 150 4x4 with the 3.5L eco boost engine. The torque of the 3.5 shows to be greater than the 5.0 So far I have really enjoyed the truck. If all did was pull my 222 I would have considered a F250 but towing is less than 10% of the mileage I put on the truck.
However, here in S. Texas the water levels fluctuate so widely you never know what you are going to face at the boat ramps. I convinced myself I need 4 wheel drive. I traded for a 2016 F 150 4x4 with the 3.5L eco boost engine. The torque of the 3.5 shows to be greater than the 5.0 So far I have really enjoyed the truck. If all did was pull my 222 I would have considered a F250 but towing is less than 10% of the mileage I put on the truck.
You do not have the required permissions to view the files attached to this post.
222 w/ 5.7 ,white with black sport graphic
Re: 2020 GMC 2500
Nice ride Mike!
Being from the frozen north, I can’t remember the last time I saw a 2 wheel drive truck of any kind on the road or on the lot.
Even if you don’t need it, a truck sure looks better as a 4x4.
Being from the frozen north, I can’t remember the last time I saw a 2 wheel drive truck of any kind on the road or on the lot.
Even if you don’t need it, a truck sure looks better as a 4x4.
2017 Cobalt R7
"Cobalt" Blue
6.2L VP 380 or 430
#FARCON Marine
"Cobalt" Blue
6.2L VP 380 or 430
#FARCON Marine
- akorcovelos
- Vice Admiral

- Posts: 2981
- Joined: Mon Sep 10, 2018 10:07 pm
- Location: Antioch, IL
- Contact:
Re: 2020 GMC 2500
Beautiful truck! I have the 3.5 in our Expedition and love it. Actually taking a half day today to replace the plugs and coil boots due to a misfire, but I'm 20k past the service life of the those parts so not surprised. Our expedition pulls the 252 without issue, though I still use my Superduty most of the time just to justify having it, lol.
1996 252 Whipple tuned 454 Magnum MPI, 496 exhaust, Corsa Captains Call, B3 w/Simrek drive shower.
‘Direct Deposit Too’
Antioch, IL
Fox Chain O' Lakes
‘Direct Deposit Too’
Antioch, IL
Fox Chain O' Lakes
-
The Dark Knight
- Ensign

- Posts: 2
- Joined: Wed Jul 24, 2019 7:33 pm
- Location: Spring Hill, KS
- Contact:
Re: 2020 GMC 2500
I'm waiting on the new Sierra/Silverado 1500 diesel. I had a 2500 Cummins before and absolutely loved it. But, for a daily driver, it was too uncomfortable. Chevy released their MPG estimates for the 4x4 trim, can't beat getting 30 mpg on the highway! (without towing of course). Anyone else in the market for this new truck?
- AsLan7
- Fleet Admiral

- Posts: 11460
- Joined: Sat Jul 29, 2017 10:58 am
- Location: Erie PA
- Been thanked: 1 time
- Contact:
Re: 2020 GMC 2500
.The Dark Knight wrote: Mon Aug 12, 2019 1:14 pm I'm waiting on the new Sierra/Silverado 1500 diesel. I had a 2500 Cummins before and absolutely loved it. But, for a daily driver, it was too uncomfortable. Chevy released their MPG estimates for the 4x4 trim, can't beat getting 30 mpg on the highway! (without towing of course). Anyone else in the market for this new truck?
Hey TDK. Welcome to the Cobaltchat forum. So glad you found us!
Be sure to post a pic of your new Silverado when you take delivery. What will you be pulling?
Again, welcome aboard mate!
.
You do not have the required permissions to view the files attached to this post.
2002 Cobalt 262
&
2005 Cobalt 263
496 MagHO
(sold )
Erie, PA
Currently boatless (for now)
will fly for food
(CChat moderator)
&
2005 Cobalt 263
496 MagHO
(sold )
Erie, PA
Currently boatless (for now)
will fly for food
(CChat moderator)
Who is online
Users browsing this forum: Google Adsense [Bot] and 48 guests
